8FUN/Bafang BBS01B/BBS02B core, stator or rotor for replacement. The bbs core includes a stator and a rotor. The price is only for stator, if you need the complate core, please add the rotor when placing the order. If you need BBSHD stator/windings, please order separately.

Bafang BBS01/BBS02 Secondary Reduction Metal Gear/Chainring Gear;

If the teeth which engages the pawl clutch is worn, then you can order this reduction gear to replace it.

Note: This reduction gear is only fit for BBS01 or BBS02, it isnot suitable for BBSHD kit.

Bafang BBS /UART M620 /UART M400 motor programming USB cable; Cable length: 45mm

If you want to change parameter of your bbs controller, you can use this programming cable.  If you want to know what parameter you can change, please see the pictures on our website. 

Please note: Making changes to your original motor/controller software may void warranty of your motor/controller. Improper changes may cause damage of your battery or motor, please do a little research on the internet before programming.

If you need the software for programming the BBS, please click here: Bafang system programming 

If the software does not work, please click the latest version: BBS programming 2020 version

Bafang BBS01/ BBS02 /BBSHD standard mid axle assembly 68mm;

This mid crank axle assemble fit for standard Bafang BBS01,  BBS02 or 68MM BBSHD motor.

BBS01/BBS02 chainring spacer 1mm; to be used for BCD104, BCD110, BCD130 chainwheel spider.

Aluminum Spacer 1mm thick

Bafang BBS01B, BBS02B, BBS03B, BBSHD compact colour display 500C; this smart display is suitable for Bafang bbs01, bbs02, bbs01b, bbs02b, bbs03b or BBSHD kits. It can be a substitute for C965, C961 or DPC18 displays.

If you need the users manuals, please download from here: BBS 500C color display users' manual 

Bafang BBS01 BBS02 wire rubber seals for bbs motor phase, the price includes 3pcs rubber seals because one  bbs motor has three motor phase wires.

Note: these seals don't fit for BBSHD motor phase wires.

Bafang BBS01/BBS02 motor hall sensor and phase wire rubber seals(one set), including 3 phase wire seals and one hall sensor seal.

When you are going to open the motor to replace the bbs nylon gear, motor rotor or stator, you may need ruin the original wire rubber seal(beside the seals, bafang normally glues these seals for fastening and it's hard to clean)

These wires seals are not suitable for BBSHD motor, if you need BBSHD wire seals, please order separately.

Bafang BBS power cable for extension or conversion.

The connector can be BBS01/02 default bullet connector, BBSHD Anderson connector, Amass XT60 connector, Amass XT90 connector.

Cable length could be 10-100cm for your demand;

Wre: 12AWG black/red wire;

If your current Bafang motor and the battery are with different connector, then you may need a conversion cable.

If your ebike battery power cable is too short, then you may need a extension cable.