Bafang M300/ M200
-
Bafang M300 G360 barebone motor 36V 350W /250W
Bafang M300 G360 mid motor, 36V 350W/250W CANbus/ UART protocol; it's the barebone motor without accessories. You can replace your current motor directly if the protocol is the same. There are two types of M300 motors, CAN protocol and UART protocol; they are not compatible, please double check your motor before orders.
If you don't know how to identify the protocol of your motor, just check the 8 pin EB-BUS cable connector, for UART protocol, the 8 pins connector from the motor is the female connector; if you check from the display, the UART motor's display is with round connector while the CAN protocol motor is with triangle connector.
-
Bafang M200 controller 36V 250W CANbus
Bafang M200 /MM G210 controller 36V 250W CANbus for replacement.
You need to calibrate the motor with Bafang Besst tool after replacing the Bafang M200 controller, please note.
-
Bafang M300 /G360 PAS circuit /PAS PCB
Bafang M300 /G360 PAS circuit; Bafang M300 /G360 mid motor pedal assisting sensor PCB;
Out of Stock Add to Wishlist Add to Compare -
Bafang M600 M510 M560 M630 M820 CANbus motor display extension cable
Original Bafang M600 M510 M560 M630 M820 M620(CANbus), M400(CANbus), M410 motor display extension cable.
This cable is suitable for all the Bafang CAN-bus display.
Cable length: 200mm.
-
Bafang M600 M500 M510 M410 M200 motor EB-bus 1T1 /1T2 /1T3 /1T4 Cable
Bafang M600 M510 M500 M410 M200 motor eb-bus cable. The 1T4 cable is one more cable than the 1T3 EB-BUS: the battery communication cable. If you need the counterpart of the battery communication, please email us. The battery COM lead is with the yellow triangle connection.
1T4 harness: display, throttle, light cable and battery communication lead; If your ebike uses a Bafang battery, then the EB-BUS cable for your bike will have battery communication leads, then you need to choose 1T4 EB-BUS cable.
1T3 harness: display, throttle and light leads; If your ebike does not use a Bafang battery, then 1T3 cable would be suitable for your motor.
1T3 harness: display, light lead and battery communication, this is mostly for M510 FC2.0 motor.
1T2 harness: display and light leads. If you don't have throttle for your bike, this one would be suitable for you. This cable is mostly for M510 too.
1T1 EB-BUS cable: only for display, if you don't use throttle and bike light, then you can choose this cable
-
Bafang M600 /M500 /M510 M200 M410 speed sensor /shift sensor adapter cable
Bafang M600 /M500 /M510 M410 M200 M820 speed sensor adapter cable, 1T1 cable is only for connecting the speed sensor; 1T2 cable for connecting speed sensor and light; 1T3 cable for connecting speed sensor, light and shift sensor; If you want to connect the shift sensor, please order the shift sensor separately.
Cable length:
1T1 cable: 15cm
1T2 cable: 20cm
1T3 cable: 30cm
-
Bafang M300 G360 Mid motor nylon gear for replacement
Bafang M300 G360 mid motor plastic gear for replacement.
For how to replace the Bafang M300 nylon gear, please check video below:
-
Bafang M300 G360 motor plastic cover
Bafang M300 G360 motor plastic cover for replacement
-
Bafang M300 G360 mid motor PAS magnet disc
Bafang M300 G360 mid motor PAS magnet disc for replacement