48V Dorado battery for ebike,14AH, 17.5AH, 20AH, 21AH, or 24AH for your choice. If you want a longer mileage, you can choose the max capacity 24AH. If your motor is 1000W-1800W, then our Dorado battery will fit your ebike.

The mounting bases for the Dorado batteries are the same, if the length is the same, then you can choose this battery as a spare battery. There are only two lengths for the Dorado cases, L1=458mm or 390mm, some people would like to measure the longest part of the battery, and get 505mm or 440mm to check which model you need to choose. 

There is a 5V USB output for the Dorado case which you can charge your mobile; 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

For the discharging connector, the default connector is 2pin connector(female PLA0274 and male PLA0273); if your ebike runs larger current, it's better to use 6pin connectors(female PLA 0239 and male PLA 0238); Normally most of the e-bikes for power less than 750W will use 2 pin connectors. If you are confuse for the connectors, please check on our website: Tigershark / Atlas/ Dorado connectors

 If you don't know which charging and discharging connector to choose, please email us.

This battery can be a replacement for Biktrix standard battery, NCM moscow Milano Plus/Venice Plus/Moscow Plus/Aspen Plus/Miami ebike batteries, 

Dorado battery (505L) is suitable for e-bikes which from ECCOBIKE/ ADDMOTOR/ VOLTBIKE/ CIVI/ M2S/ Surface 604 bikes/ Rambo/ Quietkat/ BAKCOU....etc, while 440L Dorado battery fits for the max-cargo and G20-CARGO electric bike.

Aventon Pace 500 replacement battery.If you want a larger WH battery for the Aventon Pace 500, you can order on our website.

48V in-tube battery for ebike down tube frame.

There are several types this model battery cases with different sizes, the downtube for your bike is fixed, therefore the battery case is also fixed(cannot interchangeable with other cases), please double check before ordering. The in-tube battery here is suitable for this bike frame: e-MTB full suspension ebike frame for Bafang M510 M500 M600 or M620 motors.

If you choose the smart BMS for the battery, you can view battery parameter via mobile app. 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

 This battery can be used for Ride1UP Cafe Cruiser 700 SERIES electric bike or Himiway Zebra Zebra Step Thru ebike. The length for the battery with cover is 441mm, please measure your original case height and width before ordering.

Important note: The batteries are not compatible with different size. Therefore please make sure you choose the right size for your battery.

48V 17.5AH intube battery for Dengfu Carbon fibre ebike frame.

The charging port is 5.5X2.1DC as default..

The battery itself has no ON/OFF switch. The original Dengfu frame(E10/ E22/ E23) has an ON/OFF switch and a charging port on the frame. Therefore if you are looking for the battery for the original Dengfu frame, this one can be plug and play.

Important: If your existing Dengfu frame has no ON/OFF switch and charging port on the frame, please advise us and will modify the connection of the battery socket specially. 

Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be installed on the frame down-tube. 

48V 14AH Reention EEL battery for ebike. This battery is installed in the bike tube; there are 4 types of these cases with different length and width. Our battery case is with L1*L2 = 430 X 354mm, and with width*height being 64*94mm. Please measure your case's sizes before ordering the battery.  You can also check the picture on our website for the case.

NCM Moscow M3 Magnum Ebike Replacement Battery.

This battery can be the replacement battery for Ride1up Core-5 or Ride1up LMT'D ebike. 

48V Hailong G70 battery for ebike.

 The mounting is included with the battery; Key lock is available to lock the battery on the battery mounting foot.

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

Charging port is 5.5X2.1DC or 5.5X2.5DC

Charging voltage for the 48V battery is 54.6V; recommend to charge the battery with <5Amps.

48V 14AH /48V17.5AH Ebike in-tube battery(SYR case), There are two lengths for this case, the shorter case(L-=354mm) is for Aventon level replacement battery; The longer case(L1=442mm) is for other intube ebike battery, such as Markhor frame intube battery. 

If you are looking for Aventon level replacement battery, only the shorter case will fit and the shorter can can max build 48V14Ah battery, please note.

There are several similar cases with different sizes, please double check before ordering. If your case sizes are the same as ours, please double check the discharging connector because with the same sizes, there are two types of connectors, 4 pins connector and 6 pins connector, they are not compatible. Please check our pictures for details.  If you are confused, please email us, send us some pictures of your current battery and we will check for you.

If you are looking for 52V17.5AH with the longer case, we can also build it, please email us if you need.

48V Jumbo shark new polly downtube battery for ebike(new polly DP-6 casing).  Larger capacity will be available with this battery case; the larger capacity the battery has, the longer distance you can ride with your ebike each time after fully charging. If you are running a Bafang BBS kit and want more capacity(Ah) for the battery, this one would be suitable for you. On/Off switch and LED capacity level showing are available for this battery.

If you choose the smart BMS, you can view or even set the battery parameter via your mobile BMS app(Android mobile can set the parameter while IOS mobile can only change a few parameters, please note).  

This battery can be a replacement battery for SUPER73 S or S1 ebikes.

1. Battery Capacity: 11.6AH, 14AH, 14.5AH, 15AH, 16AH, 17.5AH, 20AH, 21AH, 24.5AH etc;

2. Cells for building packs: Panasonic NCR18650BD(3200mAh), Samsung INR18650-32E(3200mAh), Samsung INR18650-35E(3500mAh),   Samsung  INR21700-50E..

3. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port);

4. Max charging current: 5A

5. Discharging port: 5pins blade contacts connector for DP-6 and PD-9 case, 4pins blades contacts for DP-4C and DP-5C case.

6. Continuous discharging(BMS): 15A(for 350W motor), 20A(for 500W motor), 25A(for 750W hub motor), 30A(for 1000W engine), 40A for 1500W motor, 50A for 2000W ebike.

48V11.6AH, 14Ah, 14.5AH, 15AH, 16A, 16.75Ah, 17.5AH, 20AH etc. high capacity down tube battery for electric bikes. It could be a powerbank because it has a 5V USB port for mobile or ipad charging. It is high capacity and can run long distance per charge.  If you are running a Bafang BBS kit and want a high power battery, this one would be suitable for you. 

There are 3 types of discharging sockets for the Hailong battery, 4pin, 5pin and 6pin, you can choose the one you need. If you don't know what connectors they are, you can check from here: Hailong discharging connectors