Controller
-
$4.00KT PAS-Pedal assist system-8 magnet poles Padel Assistant Sensor
PAS-Pedal assist system- 8 poles Pulse Padel Assistant Sensor for electric bike; the default connector is 3pin Molex male connector.
Cable length: 80cm
This PAS sensor fit for our KT series controller.
Connection as follow:
Brown wire --> +5V
Black wire --> GND
Yellow wire --> Signal.
-
$10.00KT-V12L Kunteng Dual hall 12 poles, 12 magnets pedal assisting sensor
KT-V12L Kunteng Dual hall 12 poles, 12 magnets pedal assisting sensor for ebike; it is easy to install on left side of the BB.
Cable length: 80cm
Cable connection:
Brown wire ---> +5v
Black wire---> Negative Electrode
Yellow wire ---> Signal
Note: This PAS only work with KT controller. Also,Kunteng controller normally set C1 = 2 as a defaullt setting for the 8 pole PAS, if you want to use 12 poles PAS, please set C1 =6 via the display, otherwise the PAS may not work.
-
$29.99KT/kunteng LCD3 display for 24V 36V 48V E bikes with male Junlei connector
KT/Kunteng LCD3 meter with Junlei waterproof connector for 24V 36V 48V E bikes. This LCD3 control panel is the latest version V3.0.
Holders for the LCD meter are included.
Please calculate the value of the P5 parameter with the fomula: LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can set P5 value with your own battery voltage
Please kindly note, you can not test the LCD display only voltage. You may need to install it on your E-Bike and pedal for 3-5 seconds. Then the smart KT LCD3 meter will show battery level normally.
-
$19.99KT LCD4 compact control panel/display 36V/48V for e-bike
E-bike KT LCD4 display, latest compact control panel for KT controller.
The LCD4 is with tiny dimension to install on the handle bar. It's smart and compatible with all Kunteng(KT) sinewave controllers.
For details of the LCD4 display, please download the specification here: Electric bike KT LCD4 specification
-
$5.00KT speed sensor for ebike controller or LCD display
KT speed sensor for KT controller or KT LCD1, LCD2, LCD3, LCD4, LCD5, LCD7U, LCD8, LCD9 etc.
Cable length: 1.5m
Plug: Molex 3P(fit for GBK's KT series controllers)
-
$16.0036V 250W e-bike sine wave brushless controller(CON611-A)
36V 250W brushless sine wave e-bike controller(CON611-A).
1. This controller is silent and compatible with hall sensor or sensorless motors;
2. It has head light or tail light leads enable you to connect a headlight and tail light for your electric bike;
3. If your bike is with hydraulic brake system, our CON611-A controller is compatible with oil brake sensor;
4. You can also connect the gear sensor to the brake sensor leads if you need the gear shifting fuction;
5. If you want to use pedal assisting sensor for this controller, only our 12 poles magent PAS(D12L) will work, this PAS is intergrated and designed for CON611-A controller and it is easy to install on the left side of the e-bike; the cable length for the 12 magnets PAS is 80cm; Other PAS may not fit for this controller, please note.
-
Regular Price: $35.00
Special Price $28.50
36V/48V 500W KT/Kunteng motor sinewave controller(CON124) compatible with KT LCD/LED meter
36V/48V 500W Kunteng/KT sine wave controller for e-bike. The controller can work for KT meter(LCD8H, LCD8S, LCD7U, LCD5, LCD3, LCD1, 890 LED, 900S LED, 880LED etc). All the KT LCD/LED Meter can work for this controller.
This e bike controller can only work for hall sensored motor; it is compatible with 36V or 48V 500W motors(auto switch between 36V and 48V);
It is sine wave controller, can work with or without LCD/LED meter. Sine wave controller is better than form wave controller.
Presell controller with reasonable price. This eike controller will be available on 15 April. If you need the controller urgently, please consider other controller.
-
$5.00KT LCD cable interchanging with Higo/Junlei waterproof connector or 5P JST connector
This wire includes male part and female part, no matter your controller lcd connector is with Higo/Junlei waterproof connector or standard 5P JST connector, you can use any KT LCD meter for your controller. If your KT LCD meter is defective or you want to use other model KT LCD(LCD1, LCD2, LCD3, LCD5, LCD7, LCD8S or LCD8H) control panel, this cable make it available.
-
$22.50KT ebike 24V 36V 250W sinewave controller(CON63), compatible with KT LCD display/LED meter
250W ebike brushless controller, 24V and 36V compatible, including LCD meter, 8 poles PAS and speed sensor.This controller reduces motor noise and you will feel the torque is stronger when changing the PAS level via the LCD panel. It is sine wave controller with torque simulation function. The controller is suitable for sensored motor only, please be noted. If you want a colorful display, you can choose LCD1, LCD3, LCD5, LCD6(coming soon), LCD7U, LCD8S or LCD8H. If you need LED meter, you can consider KT-890 LED or KT-900S LED meter.
Do not know which LCD meter to choose, click here fore brief comparision for the above LCD meters: KT-LCD1/LCD2/LCD3/LCD5
-
$25.99ebike Kunteng KT LCD7U 24V 36V 48V control panel LCD meter with USB output
E-bike Kuntent KT LCD7U meter with 5V1A charging USB port for mobile. The LCD7U display is compatible with 24V, 36V and 48V; you can read the battery capacity and votlage, riding speed and range, accumulated mileage etc. This LCD meter must work with KT serial controllers.
If you need the users' manual for the display, please check from here: KT LCD7U user's manual
If your controller is with waterproof connector, you can add a conversion cable for this LCD meter.
