E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.

Bafang BBS01 mid motor for 36V e bikes: 36V250W, 350W, 500W with C961 or C965 LCD display, EB-BUS cable set, brake lever, speed sensor etc. This kit is high torque and easy assembling for electric bicycle conversion. The 8FUN BBS01 mid crank kit has built-in controller and PAS. Installation tools will be provided free of charge. 

For some Europe customers' demand, we sourced some 36V350W BBS kit with no marks(They want to use 350W motor but the law requires no more than 250W); if you want 350W bbs kit with no "350W" mark on the motor, we can provide it to you. You can identify the motor power by the code of the BBS controller.

Ebike brushless hub motor torque washers;12mm diameter with a flat of 10mm

Bafang FM G311 light weight front driving motor with high speed.

8FUN FM G311 front motor 36V 250W is compatible with disc brake; it is a hall sensored motor and can work with the sine wave controller and displays.

It is with 9pin motor cable.

The motor has a larger reduction ratio(1:11) beause it is signed to have an inner rotor which enables the motor power can be released effectively. 

Speed for the motor is rated 25km/h.

The motor is black or silver color.

Motor cable is included, the cable length will be shipped randomly if you don't have special requirement because we have several motor cable lengths and two types of motor hall connector, If you have demand for the cable length and motor cable hall connector, please leave us a message.

Motor cable with 9 pin waterproof connector, male and female; male cable length 0.4m; female cable length: 85cm, 100cm or 150cm for option

If you order the female part, please also choose the motor hall connectors; if you don't choose the motor hall connectors, we will ship with the connector randomly.

If you don't know which connectors to choose, you can check our controllers, our controllers use the 6P DJ7061 connectors and 2.8pins for motor hall as default.

If you need longer wire for the motor, you can add a 9pin extension motor wire for your motor.

Engine opening tool for bafang bldc hub motors, such as SWXK, SWXK5, BPM2 etc 4 slots motor cover. 

Ebike brushless hub motor spare parts, washers, nuts etc., end plastic cap, or Bafang rear hub motor freewheel spacer.

Bafang BBS01/BBS02 Secondary Reduction Metal Gear/Chainring Gear;

If the teeth which engages the pawl clutch is worn, then you can order this reduction gear to replace it.

Note: This reduction gear is only fit for BBS01 or BBS02, it isnot suitable for BBSHD kit.

Bafang BBSHD 48V 1000W Pedal assisting Magnet ring disc;

Note: This magnet ring is not suitable for BBS01 or BBS02 kit; it's only suitable for BBSHD kit.

Bafang BBSHD axle rubber seal for replacement.

If you open your BBSHD, then you may need to break the crank shaft rubber seal.

Bafang BBS /UART M620 /UART M400 motor programming USB cable; Cable length: 45mm

If you want to change parameter of your bbs controller, you can use this programming cable.  If you want to know what parameter you can change, please see the pictures on our website. 

Please note: Making changes to your original motor/controller software may void warranty of your motor/controller. Improper changes may cause damage of your battery or motor, please do a little research on the internet before programming.

If you need the software for programming the BBS, please click here: Bafang system programming 

If the software does not work, please click the latest version: BBS programming 2020 version

BBSHD gasket for Bafang HD stator or BBSHD motor core. 

BBS01/BBS02 chainring spacer 1mm; to be used for BCD104, BCD110, BCD130 chainwheel spider.

Aluminum Spacer 1mm thick

Bafang BBS01B, BBS02B, BBS03B, BBSHD compact colour display 500C; this smart display is suitable for Bafang bbs01, bbs02, bbs01b, bbs02b, bbs03b or BBSHD kits. It can be a substitute for C965, C961 or DPC18 displays.

If you need the users manuals, please download from here: BBS 500C color display users' manual 

Bafang BBS01 BBS02 wire rubber seals for bbs motor phase, the price includes 3pcs rubber seals because one  bbs motor has three motor phase wires.

Note: these seals don't fit for BBSHD motor phase wires.

Bafang BBS power cable for extension or conversion.

The connector can be BBS01/02 default bullet connector, BBSHD Anderson connector, Amass XT60 connector, Amass XT90 connector.

Cable length could be 10-100cm for your demand;

Wre: 12AWG black/red wire;

If your current Bafang motor and the battery are with different connector, then you may need a conversion cable.

If your ebike battery power cable is too short, then you may need a extension cable. 

BBSHD pawl clutch for replacement. If your BBSHD could not pedal smoothly, it could be that the BBSHD freewheel have problem.

Bafang/8FUN BBS01/BBS02 PAS magnet disc ring for replacement. This magnet cannot fit for BBSHD, please note.

If you need the BBS PAS circuit for repair, please click here: BBS PAS circuit

There is a C clip ring to fastern the magnet disc, if you need the plier to remove the clip ring, please click here: plier for C clip ring