Motor cable with 9 pin waterproof connector, male and female; male cable length 0.4m; female cable length: 85cm, 100cm or 150cm for option

If you order the female part, please also choose the motor hall connectors; if you don't choose the motor hall connectors, we will ship with the connector randomly.

If you don't know which connectors to choose, you can check our controllers, our controllers use the 6P DJ7061 connectors and 2.8pins for motor hall as default.

If you need longer wire for the motor, you can add a 9pin extension motor wire for your motor.

9 pin motor extension wire with waterproof connector; this cable is suitable for standard 250W/350W motor.

This extension wire is compatible with our own 9 pin motor wires. 

Wire length: 100cm

KT speed sensor for KT controller or KT LCD1, LCD2, LCD3, LCD4, LCD5, LCD7U, LCD8, LCD9 etc.

Cable length: 1.5m

Plug: Molex 3P(fit for GBK's KT series controllers)

MTB Crankset Puller/ Crank Arm Remover/ bike squal hole/spline bottom axis remover

The cap is used for spline bottom only; if your bike is with squal hole bottom, please ignore the cap.

bike/MTB threaded freewheel removing tool; If your bike is with cassette freewheel, please order this one: MTB cassette freewheel removing tool

Bicycle multi function tool sets including flat/phillips screwdriver,  Hexagon(Allen) key, nut tools, and  socket wrench. It is lightweight and portable. It is a must for bike riders.

Bolts for 8fun bbs01 or bbs02 chainring adapter. This bolt is also suitable for some mountain bike chainring. Please refer to our drawing and check the length you need before ordering.

bike cassette freewheel removing tool, including two tools, one tool to discrew the nuts and the other tool to prevent the freewheel to roate.

E-bike rear light 6V LED

1. Input: DC 6V-60V

2. Output: 6V

3. Power: 0.6W

4 It can be powered by your ebike battery from 6V to 60V;

5. Cable length:  1.5M

6. You may need an ON/OFF switch to control the rear light;

7. This rear light can be mounted on the bike rear rack or on the seatpost tube. We will provide the matching backet.

8. If you also need a ebike headlight, you can order on our website, we can solder the rear light and head light to be controlled by one on/off switch.