Fatbike motor cable for Bafang 750W RM G06 snow bike hub motor.

The female cable length is 80cm, the phase wire adapts Φ5 BBS bullet connector which can bear larger current.

The extension cable length is 110cm.

ebike Atlas frame battery mouting foot.

This mounting is suitable for our downtube Atlas casing battery(DA-5C).

The price is only for the mouting, not including the battery case.

We will solder the power connector before shipment if you also add the power connector with the frame battery attachment.

The default discharging connector of the mountin is 2P original plug, please note. If you need 6P plug for larger current, please email us after placing the order.

Ebike downtube battery fixing base/mounting foot. This battery mounting is only suitable for Hailong-1 casing battery.

There are two types of discharging connector: one is with 4pin blade contacts and the other is with 5pin round golden contacts. Please check your own battery discharging connector before placing the battery mounting.

For 4pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, please check your battery body's postive and negative poles before connect the battery to the motor. 

For 5pin connector:  we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, leave the rest 3 small pins empty, please check your battery body's postive and negative poles before connect the battery to the motor. 

If you have special demand for the discharging connector positive and negative side, please email us after ordering the mounting.

Ebike new polly /Jumboshark battery mounting foot.

There are two types of New polly battery mounting foot, please check the pictureS before ordering. There is also a easy way to identify the two mountings: one is with 4 blade contacts socket and the other is with 5 blade contacts socket

This mounting foot is suitable for New polly DP-4C, DP-5C, DP-6C, DP-9C, DP-2170-4C and DP-2170-5C. 

The mounting here is with 4 blade contacts sockets.

Reention Dorado battery mounting base, head mounting base and bottom mounting base. The Dorado key lock is included with the mounting base.

The mountint bases for all the Dorado batteries are the same.

Normally the default discharging male connector is 2 pin(the part number is PLA0273, you can check your own connector's part number first); some ebikes needs larger discharging current, and the battery will use 6 pin connector for the battery(the part number is PLA0238). You can choose the one you need.

If your original connector is still in good condition, you don't need to choose the connector; just install your original connector with the mounting.

Ebike Jumboshark/supershark casing battery mounting foot; This battery mounting is suitable for small Jumboshark casing battery, larger Jumbo shark casing battery and super shark casing battery. If your battery has an built-in controller, this battery attachment would not fit, please note.

Battery attachment for downtube battery(HL-2 casing). If you are not sure which model your battery case belongs, you can check on our website which model is HL-2 battery case. 

There are two types of discharging connector: one is with 4pin blade contacts and the other is with 5pin round golden contacts. Please check your own battery discharging connector before placing the battery mounting.

For 4pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, please check your battery body's postive and negative poles before connect the battery to the motor. 

For 5pin connector:  we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, leave the rest 3 small pins empty, please check your battery body's postive and negative poles before connect the battery to the motor. 

If you have special demand for the discharging connector positive and negative side, please email us after ordering the mounting.

Ebike battery frame fixing plate/mountin base for downtube battery DS-6 case. We can solder the power plug with the required connector for you before shipment.

If you are looking for larger power connector for this mounting base, we can provide 6 pin connector for the mounting(the latest version for this case is 6 pin connector for larger current, the older version is with 6pin connector for larger current, the dimensions for the connectors are the same, just the pin numbers are different). Please check your battery discharging connectors before ordering the battery fixing plate.

Reention EEL Pro /Mini battery mounting base with key lock;

Ride1up core 5 /LMT'D battery mounting base with key lock;

There are two types of Reention EEL battery cases, EEL-mini and EEL pro case, the mounting bases for them are not compatible; Reention EEL Mini and EEL pro are the same with width(64mm), but the Reention mini is less in height(74mm) while EEL pro case is higher(94mm); Please refer to our picture, check your original case and choose the right model for the mounting base.