Reention Dorado battery mounting base, head mounting base and bottom mounting base. The Dorado key lock is included with the mounting base.

The mountint bases for all the Dorado batteries are the same.

Normally the default discharging male connector is 2 pin(the part number is PLA0273, you can check your own connector's part number first); some ebikes needs larger discharging current, and the battery will use 6 pin connector for the battery(the part number is PLA0238). You can choose the one you need.

If your original connector is still in good condition, you don't need to choose the connector; just install your original connector with the mounting.

Ebike Hailong battery capacity level LED PCB 36V 48V 52V for replacement; Hailong style batteries share the same battery level LED PCB.

If you are not sure your battery case is Hailong style batteyr or not, please check the following cases which share the same Hailong battery level LED PCB:

Hailong 01 case: Ebike Hailong 01 case -greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com

Hailong 02 or Hailong G80 case: ebike new downtube battery case for diy battery pack-Greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com

Hailong G70 casing battery: 36V 24AH eBIKE Hailong G70 battery -Greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com 

Reention battery level PCB.

New polly Jumboshark battery level LED PCB 36V 48V 52V 60 72V for indicating the battery capacity Levels

The LED PCB is suitable for DP-4, DP-5, DP-6, DP-7, DP-9, DP-2170-4C, DP-5C, DP-2170-5C, DP-9C.

The LED is sutiable for all New polly batteries;

Tigershark battery level LED PCB is the same as the downtube Atlas battery level PCB. If you are not sure about which LED level to choose, please check below our battery case first.

New polly battery case

Tigershark battery case

Atlas battery case

If you are building ebike batteries with the New polly cases, you can order different LED PCB for different batteries.

Rubber spacer for New Polly /Jumbo shark/ Tiger shark /Atlas battery mounting.

There are two types of new polly mounting foots, one is with 4 pin socket and the other is with 5 pin socket; the 5 pin socket new polly casing battery would need 4 spacers while the 4 pin mounting base would need 3 rubber spacers.

The tigershark casing battery needs 3 spacers;

The Atlas battery needs 3 spacers.

The rubber spacer would be also suitable for other Reention downtube mounting batteries; the rubber spacers arrived in April, for the mounting rails of Reention cases, such as new polly battery, atlas downtube battery and tigershark battery, we will include the rubber spacers with the shipment.

Dual battery converter with wide DC input 24V -72V. 

Output: DC 24V -72V, max 30A or 40A current. 

Input with XT60 male connector; output with XT60 female connector. 

If you have two batteries(24V-72V),  you want to use the two batteries with one ebike, then you can connect the two batteries with the dual battery converter.  

When you are going to charge the battery, please switch one of the batteries first before charging because the dual battery converter only protect the two batteries discharging; it has no protection for simultaneous charging.

Ebike new polly /Jumboshark battery mounting foot.

There are two types of New polly battery mounting foot, please check the pictureS before ordering. There is also a easy way to identify the two mountings: one is with 4 blade contacts socket and the other is with 5 blade contacts socket

This mounting foot is suitable for New polly DP-4C, DP-5C, DP-6C, DP-9C, DP-2170-4C and DP-2170-5C. 

The mounting here is with 4 blade contacts sockets.

Ebike New polly /Jumbo shark battery connector(4 pins). There are two types of New polly connector, one is with 5 pins and other is with 4 pins, the two connector cannot be interchangeable. Please check your own battery connector before ordering. 

If you need the 5 pins New polly socket/connector, please order here: 5 pin New polly connector

Hailong G70 battery socket with 5 blade contacts.

There are 4 types of Hailong sockets, please check the pictures and the related casing battery to avoid ordering the wrong socket/connector.

If you are not sure which Hailong battery the connector adapts, please click here to check the Hailong G70 casing battery to check first: 10S tigershark/hailong battery bms

SYR in-tube battery connector, 4-pins connector, it is suitable for Avention Level battery, Frey CC battery, E-joe intube battery etc;

If your battery key has "SYR" logo, and your connector is 4 blades pins connector, then this connector will fit for your battery.

Battery attachment for downtube battery(HL-2 casing). If you are not sure which model your battery case belongs, you can check on our website which model is HL-2 battery case. 

There are two types of discharging connector: one is with 4pin blade contacts and the other is with 5pin round golden contacts. Please check your own battery discharging connector before placing the battery mounting.

For 4pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, please check your battery body's postive and negative poles before connect the battery to the motor. 

For 5pin connector:  we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, leave the rest 3 small pins empty, please check your battery body's postive and negative poles before connect the battery to the motor. 

If you have special demand for the discharging connector positive and negative side, please email us after ordering the mounting.

Ebike downtube battery fixing base/mounting foot. This battery mounting is only suitable for Hailong-1 casing battery.

There are two types of discharging connector: one is with 4pin blade contacts and the other is with 5pin round golden contacts. Please check your own battery discharging connector before placing the battery mounting.

For 4pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, please check your battery body's postive and negative poles before connect the battery to the motor. 

For 5pin connector:  we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, leave the rest 3 small pins empty, please check your battery body's postive and negative poles before connect the battery to the motor. 

If you have special demand for the discharging connector positive and negative side, please email us after ordering the mounting.

E-bike frame battery case(DS-6); this case has ON/OFF switch, 5V USB output and battery indicator.

The default charging port is round 2.1DC connector(your charger needs to use round 5.5x2.1DC connector); if you want fast charging for the battery, we can install 2.5DC charging port for the case which can bear larger current.

Cell holders and battery mounting base are included with the case.

Ebike battery frame fixing plate/mountin base for downtube battery DS-6 case. We can solder the power plug with the required connector for you before shipment.

If you are looking for larger power connector for this mounting base, we can provide 6 pin connector for the mounting(the latest version for this case is 6 pin connector for larger current, the older version is with 6pin connector for larger current, the dimensions for the connectors are the same, just the pin numbers are different). Please check your battery discharging connectors before ordering the battery fixing plate.

ebike battery downtube case mounting on bike frame with slim dimension(hailing 1 case).

Discharging port is 4pin, charging port is round 5.5x2.1 or 5.5x2.5DC connector. If you want larger charging current, please choose 2.5DC charging port.

Cell holders and battery mounting foot are included with the case. If you also need the matching BMS/PCM for this casing battery, you can click here for the bms.

Atlas frame battery key lock  or Jumbo shark battery.  . 

If you are not sure which case the key set uses for, please check dimension or pictures for our Atlas frame battery case and Jumbo shark battery case.

Reention Dorado battery, EEL battery, tigershark, Atlas battery connector:  2 pins, 5 pins or 6pins. 6P is for larger Amps demand.

These are the original connectors for the tigershark battery or Atlas frame battery, male and female.

This mounting connector is also suitable for other Reention cases, you can check the dimension before placing the order.

2 pins connector male number: "PLA0273",  female part number"PLA0274". Another 2 pins connector male number is PLA0379, and matching female part(with a small PCB on the back) is PLA0378.

6 pins female part number: PLA0239, 6pin male part number: PLA0238; If the part number is the same as your original's then this plug will also fit for your case. 

If you need the power cable soldered with this plug, please order from here: Tigershark/ Atlas/ Dorado power cable with PLA 0273 plug

E-bike battery case Hailong 02 or Hailong G80 for lithium battery pack. The new battery case has a 5V USB output for your mobile or ipad charging. It also has an ON/OFF switch. This case is designed for bicycle frame bottle cage posistion.  With the provided fixing plate, you can fix the battery on the bike frame. Some customers complain the discharging connector would be loosen easily; now this connector has been improved.

Hailong 02 case can max put 65pcs 18650 cells, and 21700 cells are not available for Hailong 02 case; if you need case for 21700 cells, Hailong G80 can build the 21700 battery packs, Hailong G80 case are the max cae of Hailong 02, they share the same key lock, the same discharging connector, the same charging connector and the same mounting. Hailong G80 can put 78pcs 18650 cells or 52pcs 21700 cells. The cell holders for 18650 cell and 21700 cell are different.

Ebike Atlas battery case with 5V USB output for ipad or mobile phone charging. The stardard dischargingn connector is 2pin connector; if you want larger current for the battery, please choose 6pin discharging connector. The mounting base is included with the case.

4/5 pins connector for e-bike lithium ion battery, for rear rack casing, downtube silver fish casing. There may be different connectors for rear rack or filverfish casing battery, please check the dimension of the original connector before ordering.