Battery parts
-
Reention Dorado battery mounting base with key lock
Reention Dorado battery mounting base, head mounting base and bottom mounting base. The Dorado key lock is included with the mounting base.
The mountint bases for all the Dorado batteries are the same.
Normally the default discharging male connector is 2 pin(the part number is PLA0273, you can check your own connector's part number first); some ebikes needs larger discharging current, and the battery will use 6 pin connector for the battery(the part number is PLA0238). You can choose the one you need.
If your original connector is still in good condition, you don't need to choose the connector; just install your original connector with the mounting.
-
Ebike Hailong battery level LED PCB 36V 48V 52V
Ebike Hailong battery capacity level LED PCB 36V 48V 52V for replacement; Hailong style batteries share the same battery level LED PCB.
If you are not sure your battery case is Hailong style batteyr or not, please check the following cases which share the same Hailong battery level LED PCB:
Hailong 02 or Hailong G80 case: ebike new downtube battery case for diy battery pack-Greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com
Hailong G70 casing battery: 36V 24AH eBIKE Hailong G70 battery -Greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500, Bafang M510, KT controller with display-GreenBikeKit.com
-
Reention New polly jumbo shark /Tigershark battery LED PCB for 36V 48V 52V 60V 72V battereis
Reention battery level PCB.
New polly Jumboshark battery level LED PCB 36V 48V 52V 60 72V for indicating the battery capacity Levels
The LED PCB is suitable for DP-4, DP-5, DP-6, DP-7, DP-9, DP-2170-4C, DP-5C, DP-2170-5C, DP-9C.
The LED is sutiable for all New polly batteries;
Tigershark battery level LED PCB is the same as the downtube Atlas battery level PCB. If you are not sure about which LED level to choose, please check below our battery case first.
If you are building ebike batteries with the New polly cases, you can order different LED PCB for different batteries.
-
Rubber spacer for New Polly /Jumboshark /Tigershark/Atlas battery mounting
Rubber spacer for New Polly /Jumbo shark/ Tiger shark /Atlas battery mounting.
There are two types of new polly mounting foots, one is with 4 pin socket and the other is with 5 pin socket; the 5 pin socket new polly casing battery would need 4 spacers while the 4 pin mounting base would need 3 rubber spacers.
The tigershark casing battery needs 3 spacers;
The Atlas battery needs 3 spacers.
The rubber spacer would be also suitable for other Reention downtube mounting batteries; the rubber spacers arrived in April, for the mounting rails of Reention cases, such as new polly battery, atlas downtube battery and tigershark battery, we will include the rubber spacers with the shipment.
-
Dual battery converter for e-bike 24V-72V wide DC input 30A /40A
Dual battery converter with wide DC input 24V -72V.
Output: DC 24V -72V, max 30A or 40A current.
Input with XT60 male connector; output with XT60 female connector.
If you have two batteries(24V-72V), you want to use the two batteries with one ebike, then you can connect the two batteries with the dual battery converter.
When you are going to charge the battery, please switch one of the batteries first before charging because the dual battery converter only protect the two batteries discharging; it has no protection for simultaneous charging.
-
Ebike new polly battery mounting foot/rail with 4 blade contacts socket
Ebike new polly /Jumboshark battery mounting foot.
There are two types of New polly battery mounting foot, please check the pictureS before ordering. There is also a easy way to identify the two mountings: one is with 4 blade contacts socket and the other is with 5 blade contacts socket
This mounting foot is suitable for New polly DP-4C, DP-5C, DP-6C, DP-9C, DP-2170-4C and DP-2170-5C.
The mounting here is with 4 blade contacts sockets.
-
New polly /Jumbo shark battery connector(4 pins)
Ebike New polly /Jumbo shark battery connector(4 pins). There are two types of New polly connector, one is with 5 pins and other is with 4 pins, the two connector cannot be interchangeable. Please check your own battery connector before ordering.
If you need the 5 pins New polly socket/connector, please order here: 5 pin New polly connector
-
Hailong G70 battery connector(5 blade contacts)
Hailong G70 battery socket with 5 blade contacts.
There are 4 types of Hailong sockets, please check the pictures and the related casing battery to avoid ordering the wrong socket/connector.
If you are not sure which Hailong battery the connector adapts, please click here to check the Hailong G70 casing battery to check first: 10S tigershark/hailong battery bms
-
SYR In-tube battery 4-pins connector /Avention level /Frey CC battery connector
SYR in-tube battery connector, 4-pins connector, it is suitable for Avention Level battery, Frey CC battery, E-joe intube battery etc;
If your battery key has "SYR" logo, and your connector is 4 blades pins connector, then this connector will fit for your battery.
-
ebike downtube battery hailong02/03/ HL-2 mounting base(new style)
Battery attachment for downtube battery(HL-2 casing). If you are not sure which model your battery case belongs, you can check on our website which model is HL-2 battery case.
There are two types of discharging connector: one is with 4pin blade contacts and the other is with 5pin round golden contacts. Please check your own battery discharging connector before placing the battery mounting.
For 4pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, please check your battery body's postive and negative poles before connect the battery to the motor.
For 5pin connector: we solder the positive and negative power cable according to the marks "+" and "-" on the connector housing, leave the rest 3 small pins empty, please check your battery body's postive and negative poles before connect the battery to the motor.
If you have special demand for the discharging connector positive and negative side, please email us after ordering the mounting.