Connectors and cables
-
$4.00e-bike Reention Tigershark Atlas /Dorado/ EEL battery connector 2 Pins, 5 pins or 6 Pins
Reention Dorado battery, EEL battery, tigershark, Atlas battery connector: 2 pins, 5 pins or 6pins. 6P is for larger Amps demand.
These are the original connectors for the tigershark battery or Atlas frame battery, male and female.
This mounting connector is also suitable for other Reention cases, you can check the dimension before placing the order.
2 pins connector male number: "PLA0273", female part number"PLA0274". Another 2 pins connector male number is PLA0379, and matching female part(with a small PCB on the back) is PLA0378.
6 pins female part number: PLA0239, 6pin male part number: PLA0238; If the part number is the same as your original's then this plug will also fit for your case.
If you need the power cable soldered with this plug, please order from here: Tigershark/ Atlas/ Dorado power cable with PLA 0273 plug
-
$0.20e-bike motor hall/ throttle/ ebrake connector DJ7061A-2.8-11/21 male/female plug
e-bike motor hall connector DJ7061A-2.8-11/21 male/female plug; this plug is normally used for motor hall, ebike brake, e bike gas/throttle end connection.
6P plug for motor hall;
3P plug for e-bike throttle/gas;
2P plug for e-brake;
Plug sping and male tab are included.
-
$0.50e-bike motor phase/controller power/TSDZ2 motor bullet connector 4.0/4.2mm with housing
electric bike motor phase connector green bullet connector male/famale with isolated cover;
Ebike brushless controlle power connector bullet type male/female with housing;
Bullet connector 4.0mm/4.2mm for battery/motor phase/controller power connection.
The price includes male and female bullet connector, amle and female isolated protector.
This connector is suitable for Tongsheng TSDZ2 mid motor power plug.
-
$2.00Amass XT90H connector for battery or RC with high current
Amass XT90H connector, male and female with cover. If you are looking for a small house and reliable connector for battery or RC with larger current, the Amass XT90H connector will be suitable for you. It can go 90A current.
-
$5.00KT LCD cable interchanging with Higo/Junlei waterproof connector or 5P JST connector
This wire includes male part and female part, no matter your controller lcd connector is with Higo/Junlei waterproof connector or standard 5P JST connector, you can use any KT LCD meter for your controller. If your KT LCD meter is defective or you want to use other model KT LCD(LCD1, LCD2, LCD3, LCD5, LCD7, LCD8S or LCD8H) control panel, this cable make it available.
-
$1.00Amass XT60H connector for battery or RC with larger current
Amass bullet connector XT60H for ebike battery or RC battery. This connector is the upgraded version for XT60. It has an extra sheath/cover to protect the incoming cables.
-
$6.00Bafang BBS/Ultra M620 /Max drive M400 kit LCD display extension cable
Bafang BBS01/BBS02/BBSHD C965/C961/C963 LCD extension cable. Cable length: 50cm.
This LCD extension cable is also suitable for Ultra M620, Max drive M400 mid motor LCD which has the round 5pin LCD connector. -
$8.00Bafang BBS EB-BUS 1T4 extension cable
8fun bbs eb-bus extension cable; cable length: 50cm.
-
$6.50Bafang BBS01/02/BBSHD kit speed sensor extension cord
Bafang mid motor BBS speed sensor extension cord with cable length being 40cm, 60cm and 100cm.
-
$4.00Controller power cable for ebike battery or controller
E-bike power cord for connecting motor controller to ebike battery.
For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).
For connecting battery side, you can choose your demand connectors.
Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.
Default cable would be 14AWG.
If you need 12AWG wire for the power cable, please leave a message.
