Connectors and cables

ebike connectors and cables, such as XLR connector, air plug, anderson connector etc.
Learn More

Connectors and cables

ebike connectors and cables, such as XLR connector, air plug, anderson connector etc.
  1. e-bike Reention Tigershark Atlas /Dorado/ EEL battery connector 2 Pins, 5 pins or 6 Pins
    $4.00

    e-bike Reention Tigershark Atlas /Dorado/ EEL battery connector 2 Pins, 5 pins or 6 Pins

    Reention Dorado battery, EEL battery, tigershark, Atlas battery connector:  2 pins, 5 pins or 6pins. 6P is for larger Amps demand.

    These are the original connectors for the tigershark battery or Atlas frame battery, male and female.

    This mounting connector is also suitable for other Reention cases, you can check the dimension before placing the order.

    2 pins connector male number: "PLA0273",  female part number"PLA0274". Another 2 pins connector male number is PLA0379, and matching female part(with a small PCB on the back) is PLA0378.

    6 pins female part number: PLA0239, 6pin male part number: PLA0238; If the part number is the same as your original's then this plug will also fit for your case. 

    If you need the power cable soldered with this plug, please order from here: Tigershark/ Atlas/ Dorado power cable with PLA 0273 plug

  2. e-bike motor hall/ throttle/ ebrake connector DJ7061A-2.8-11/21 male/female plug
    $0.20

    e-bike motor hall/ throttle/ ebrake connector DJ7061A-2.8-11/21 male/female plug

    e-bike motor hall connector DJ7061A-2.8-11/21 male/female plug; this plug is normally used for motor hall, ebike brake, e bike gas/throttle end connection.

    6P plug for motor hall;

    3P plug for e-bike throttle/gas;

    2P plug for e-brake;

    Plug sping and male tab are included.

  3. e-bike motor phase/controller power/TSDZ2 motor bullet connector 4.0/4.2mm with housing
    $0.50

    e-bike motor phase/controller power/TSDZ2 motor bullet connector 4.0/4.2mm with housing

    electric bike motor phase connector green bullet connector male/famale with isolated cover;

    Ebike brushless controlle power connector bullet type male/female with housing;

    Bullet connector 4.0mm/4.2mm for battery/motor phase/controller power connection.

    The price includes male and female bullet connector, amle and female isolated protector.

    This connector is suitable for Tongsheng TSDZ2 mid motor power plug.

  4. Amass XT90H connector for battery or RC with high current
    $2.00

    Amass XT90H connector for battery or RC with high current

    Amass XT90H connector, male and female with cover. If you are looking for a small house and reliable connector for battery or RC with larger current, the Amass XT90H connector will be suitable for you. It can go 90A current.

  5. KT LCD cable interchanging with Higo/Junlei waterproof connector or 5P JST connector KT LCD cable interchanging with Higo/Junlei waterproof connector or 5P JST connector
    $5.00

    KT LCD cable interchanging with Higo/Junlei waterproof connector or 5P JST connector

    This wire includes male part and female part, no matter your controller lcd connector is with Higo/Junlei waterproof connector or standard 5P JST connector, you can use any KT LCD meter for your controller. If your KT LCD meter is defective or you want to use other model KT LCD(LCD1, LCD2, LCD3, LCD5, LCD7, LCD8S or LCD8H) control panel, this cable make it available.