Wheel Kit Parts
-
$6.00bike/MTB cassette freewheel removing tool
bike cassette freewheel removing tool, including two tools, one tool to discrew the nuts and the other tool to prevent the freewheel to roate.
-
$9.95e-bike rear light/ 6V LED bike taillight(powered by battery or controller)
E-bike rear light 6V LED
1. Input: DC 6V-60V
2. Output: 6V
3. Power: 0.6W
4 It can be powered by your ebike battery from 6V to 60V;
5. Cable length: 1.5M
6. You may need an ON/OFF switch to control the rear light;
7. This rear light can be mounted on the bike rear rack or on the seatpost tube. We will provide the matching backet.
8. If you also need a ebike headlight, you can order on our website, we can solder the rear light and head light to be controlled by one on/off switch.
-
$10.00KT-V12L Kunteng Dual hall 12 poles, 12 magnets pedal assisting sensor
KT-V12L Kunteng Dual hall 12 poles, 12 magnets pedal assisting sensor for ebike; it is easy to install on left side of the BB.
Cable length: 80cm
Cable connection:
Brown wire ---> +5v
Black wire---> Negative Electrode
Yellow wire ---> Signal
Note: This PAS only work with KT controller. Also,Kunteng controller normally set C1 = 2 as a defaullt setting for the 8 pole PAS, if you want to use 12 poles PAS, please set C1 =6 via the display, otherwise the PAS may not work.
-
$15.00Motor cable for Bafang 750W fatbike/ snow bike hub motor
Fatbike motor cable for Bafang 750W RM G06 snow bike hub motor.
The female cable length is 80cm, the phase wire adapts Φ5 BBS bullet connector which can bear larger current.
The extension cable length is 110cm.
-
$12.00e-bike 12 poles dual hall pedelec sensor-split sensor(PAS) for easy installation
Split 12 magnets dual hall sensor with higher accuracy for electric bikes. It is easy to install with the split PAS. No need to remove the crank; Only plug the split magnets arount the bottom bracket axle, then fix the sensor on the seat tube.
The PAS fits our KT series controllers.
-
$3.00Bicycle B B axle wrench tools
Bicycle b b axle wrench tools for assembling E-bike PAS. -
$3.00E-bike hub motor spare parts
Ebike brushless hub motor spare parts, washers, nuts etc., end plastic cap, or Bafang rear hub motor freewheel spacer.
-
$399.0048V 24AH ~34AH /1152WH ~1632WH fuel tank battery for ebike /e-motorcycle
Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be installed on the frame down-tube.
If you are looking for larger AH or WH batteries, this one would be suitable for you, the max AH we can build is 48V 34AH (1632WH). The larger AH you have, the more mileage you can get each charge.
There are basically two types of fuel tank cases, all are the same except for different height.
The battery mounting foot is included.
We build the batteries with Premium cells: Samsung INR18650 35E, LG INR18650 MJ1, Samsung INR21700 50E or Samsung INR21700 50G cells. -
$3.00 As low as: $2.80Controller case for 250W 6 mosfets controller-GBK-CON611, CON621, CON63 or CON94 controller
ABS controller case for ebike controller;
Small case is suitable for 250W controller-GBK-CON611, CON621 or CON63, can be mounted on the frame of bicycle;
Larger case is suitable for CON94 350W controller, can be mounted on ebike frame;
-
$3.00Wuxing Two Switch with horn switch/light switch
Wuxing Two Switch with horn switch and light switch; cable length 1.5m
