BBSHD parts
-
CA$176.73Bafang BBSHD motor core
HD motor core for Bafang BBSHD.
HD motor core gasket is included.
Wire rubber seal and motor hall seal are included.
The Bafang BBSHD has several bottom bracket, 68mm and 73mm HD motor share the same motor core while 100mm, 110mm and 120mm share the same HD core.
Replacing BBSHD motor core is similar with BBS01/02 Motor core: -
CA$15.64Bafang BBSHD PAS magnet disc ring for replacement
Bafang BBSHD 48V 1000W Pedal assisting Magnet ring disc;
Note: This magnet ring is not suitable for BBS01 or BBS02 kit; it's only suitable for BBSHD kit.
-
CA$17.00Bafang BBS /M620 /M400 UART motor programming cable
Bafang BBS /UART M620 /UART M400 motor programming USB cable; Cable length: 45mm
If you want to change parameter of your bbs controller, you can use this programming cable. If you want to know what parameter you can change, please see the pictures on our website.
Please note: Making changes to your original motor/controller software may void warranty of your motor/controller. Improper changes may cause damage of your battery or motor, please do a little research on the internet before programming.
If you need the software for programming the BBS, please click here: Bafang system programming
If the software does not work, please click the latest version: BBS programming 2020 version
-
Regular Price: CA$13.60
Special Price CA$7.07
Bafang BBS01/ BBS02 /BBSHDstandard mid axle 68mm BB
Bafang BBS01/ BBS02 /BBSHD standard mid axle assembly 68mm;
This mid crank axle assemble fit for standard Bafang BBS01, BBS02 or 68MM BBSHD motor.
-
CA$8.84Gasket for Bafang BBSHD reduction gear/case
Bafang BBSHD/BBS03 steel reduction gear gasket.
If you open your BBSHD motor, then the gasket for the reduction gear would be broke, which means you mean need a new one.
-
CA$9.52BBSHD gasket for motor core
BBSHD gasket for Bafang HD stator or BBSHD motor core.
-
CA$80.24Bafang BBS mini color display 500C
Bafang BBS01B, BBS02B, BBS03B, BBSHD compact colour display 500C; this smart display is suitable for Bafang bbs01, bbs02, bbs01b, bbs02b, bbs03b or BBSHD kits. It can be a substitute for C965, C961 or DPC18 displays.
If you need the users manuals, please download from here: BBS 500C color display users' manual
-
CA$9.45 As low as: CA$7.56Bafang BBSHD motor hall and phase wire rubber seals(one set)
Bafang BBSHD motor hall and phase wire rubber seals(one set), including 3 phase wire seals and one hall seal.
When you are going to open the motor to replace the bbs nylon gear, motor rotor or stator, you may need ruin the original wire rubber seal(beside the seals, bafang normally glues these seals for fastening and it's hard to clean)
These wires seals are not suitable for BBS01/BBS02 motor, if you need the BBS01/02 motor hall and phase wire seal, please order separately.
-
CA$5.44Bafang BBS01 BBS02 BBSHD power cable for extension or conversion
Bafang BBS power cable for extension or conversion.
The connector can be BBS01/02 default bullet connector, BBSHD Anderson connector, Amass XT60 connector, Amass XT90 connector.
Cable length could be 10-100cm for your demand;
Wre: 12AWG black/red wire;
If your current Bafang motor and the battery are with different connector, then you may need a conversion cable.
If your ebike battery power cable is too short, then you may need a extension cable.
-
CA$4.76Bafang BBSHD / BBS03 axle shaft rubber seal
Bafang BBSHD axle rubber seal for replacement.
If you open your BBSHD, then you may need to break the crank shaft rubber seal.
-
CA$16.31Bafang BBSHD pawl clutch/ pedal freewheel
BBSHD pawl clutch for replacement. If your BBSHD could not pedal smoothly, it could be that the BBSHD freewheel have problem.
-
CA$8.16Bafang BBS01/BBS02/BBS03/BBSHD needle roller bearing part for bbs repair(NK1716)
Bafang bbs01, bbs02, BBS03/BBSHD needle roller bearing part for replacement : needle bearing NK17/16. It can also work as NK17/16A as our customer proved.
-
CA$61.20Bafang DP C07 /C966 /DP C10 LCD display
Bafang DP C07( also called C966) display for Bafang Max drive M400, M300, BBS serial motors.
Bafang DP C10 display Bafang M400, M300, M420 etc motors.
There are CANbus and UART protocols for the two displays, how to identify UART or CANbus? If your motor is CANbus, then your display must be CANbus, If your motor is UART motor, then your display is also UART protocol; another method is to check the display connector, CANbus display is with triangle connector while UART display is with round 5 pin female connector. You can check our picture.
UART display, please set the wheel size and speed yourself.
The C966 display has automatically backlight which would be more convemience during night riding.
-
CA$115.60Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400
DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.
CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.
The display has 5 level assisting and 6km walk assisting.
The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.
The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.
The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).
The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual
-
CA$19.72 As low as: CA$17.00ebike rear light/ 6V LED taillight for bafang mid motor
Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike.
If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket.
The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light. The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.
If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.
If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.
If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.
