BBSHD pawl clutch for replacement. If your BBSHD could not pedal smoothly, it could be that the BBSHD freewheel have problem.

Bafang bbs01, bbs02, BBS03/BBSHD needle roller bearing part for replacement : needle bearing NK17/16. It can also work as NK17/16A as our customer proved.

Bafang DP C07( also called C966) display for Bafang Max drive M400, M300, BBS serial motors.  

Bafang DP C10 display Bafang M400, M300, M420 etc motors.

There are CANbus and UART protocols for the two displays, how to identify UART or CANbus? If your motor is CANbus, then your display must be CANbus, If your motor is UART motor, then your display is also UART protocol; another method is to check the display connector, CANbus display is with triangle connector while UART display is with round 5 pin female connector. You can check our picture.

UART display, please set the wheel size and speed yourself.

The C966 display has automatically backlight which would be more convemience during night riding.

DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.

CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.

The display has 5 level assisting and 6km walk assisting.

The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.

The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.

The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).

The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual

Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike. 

If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket. 

The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light.  The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.

If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.

If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.

If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.

BBS hall gomet sealing;

BBS01/BBS02 hall sensor wire rubber gasket;

BBSHD hall wire rubber seal;

When you open the motor to replace the motor stator, or HD rotor, you may ruin the hall sensor wire gomet, therefore you may need a new wire ruber seal for the bbs.  

BBS01, BB0S2 and BBSHD use the same hall wire rubber seal.

DZ41 screen(UART) for Bafang BBS motor, UART M620 motor, UART M400 motor, UART M420 motor.

This LED meter is suitable for all the Bafang UART motors. How to identify your motor is UART motor or not? Just check the screen connector, it is a round female connector, then it is UART Bafang motor display.

Bafang BBS01/ BBS02B/ BBSHD nylon gear alloy cover /plate;

Importantly, if your BBS is with the 8FUN logo, this alloy plate may not fit. You need to check your nylon gear. If your motor nylon gear is the same as the one we are selling, then you can use this alloy plate.   

Bafang mid crank kit(BBS01, BBS02, BBS03/BBSHD) clutch replacement spare parts; the price includes two sets of thrust ball bearing(each bbs kit needs two sets of thrust ball bearings). There are also two axle retaining lock nuts(4 key slots, a thick one and a thinner one) to lock the thrust bearings in the bbs axle, if your lock nuts are broken, you can order them on our website as well. These are needed when replacing the clutch; if you need tools for replacing these washers and lock nuts, please order the bbs axleremover/spanner/wrench on our website.

One BBS motor needs two sets thrust ball bearings.