Bafang M300/ M200
-
Bafang M300 G360 barebone motor 36V 350W /250W
Bafang M300 G360 mid motor, 36V 350W/250W CANbus/ UART protocol; it's the barebone motor without accessories. You can replace your current motor directly if the protocol is the same. There are two types of M300 motors, CAN protocol and UART protocol; they are not compatible, please double check your motor before orders.
If you don't know how to identify the protocol of your motor, just check the 8 pin EB-BUS cable connector, for UART protocol, the 8 pins connector from the motor is the female connector; if you check from the display, the UART motor's display is with round connector while the CAN protocol motor is with triangle connector.
-
Bafang M200 controller 36V 250W CANbus
Bafang M200 /MM G210 controller 36V 250W CANbus for replacement.
You need to calibrate the motor with Bafang Besst tool after replacing the Bafang M200 controller, please note.
-
Bafang M300 /G360 PAS circuit /PAS PCB
Bafang M300 /G360 PAS circuit; Bafang M300 /G360 mid motor pedal assisting sensor PCB;
Out of Stock Add to Wishlist Add to Compare -
Bafang M600 M510 M560 M630 M820 CANbus motor display extension cable
Original Bafang M600 M510 M560 M630 M820 M620(CANbus), M400(CANbus), M410 motor display extension cable.
This cable is suitable for all the Bafang CAN-bus display.
Cable length: 200mm.