Bafang M600 M500 M510 m410 m200 m820 speed sensor extension cable.

There are two types of speed sensor, one is with blue connector and the other is with black connector, please check and choose the right extension cable.

Cable with blue connectoris about 60cm

Cable with with black connector is 40cm. This cable can also be the M600 M510 M820 M410 M200 M500 EB-BUS extension cable.

Bafang M600 M510 M500 freewheel gear

Bafang M600 M510 M500 one way bearing for the main steel gear

Bafang M620 G510 M600 M500 M420 chainwheel lock nut wrench/spanner

Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike. 

If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket. 

The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light.  The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.

If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.

If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.

If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.

Bafang M600 M510 M500 M410 M200 motor eb-bus cable.  The 1T4 cable is one more cable than the 1T3 EB-BUS: the battery communication cable. If you need the counterpart of the battery communication, please email us. The battery COM lead is with the yellow triangle connection.

1T4 harness: display, throttle, light cable and battery communication lead;  If your ebike uses a Bafang battery, then the EB-BUS cable for your bike will have battery communication leads, then you need to choose 1T4 EB-BUS cable.

1T3 harness: display, throttle and light leads; If your ebike does not use a Bafang battery, then 1T3 cable would be suitable for your motor.

1T3 harness: display, light lead and battery communication, this is mostly for M510 FC2.0 motor.

1T2 harness: display and light leads. If you don't have throttle for your bike, this one would be suitable for you. This cable is mostly for M510 too.

1T1 EB-BUS cable: only for display, if you don't use throttle and bike light, then you can choose this cable

Bafang mid motor M600 M500 M510 Chainring 32T/ 34T/ 36T/ 38T/ 40T.

The 38T and 36t  chainring has the cover, if you don't like the cover, you can remove it.

Bafang M600 M500 Plastic guart/cover; There are two types of M600/ M500 /M510 motor hangers, and the plastic guards are different for the two types of hangers. Please check the picture and thoose the right motor cover/strim.

The AC M02 cover work with the G520A guard for G520A hanger

The AC M03 is for the M600, and the AC M04 guards is for the M500 /M510 motor,  both the AC M03 and the AC M04 are work with for the the G520B guard for the G520B hanger.

Thumb throttle/accelerator for Bafang central driven motor kit bbs01, bbs02,  BBSHD, Ultra G510 M620, Max drive M400, M420, M500, M600 or M800 mid motors.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.