Ebike battery
-
48V 13S Universal Ebike battery BMS with small size for Hailong/tigershark/new-polly case
48V 20A/25A 13S BMS/PCM for e-bike downtube batteries. This BMS is with small dimension(L80*W60*T10mm) with balance, ON/OFF switch, battery capacity LED and high temperature protection.
This battery management system(BMS) is suitable for most frame batteries, such as Hailong-02/03 casing battery, DA-5C Casing battery, DS-6 casing battery or new Polly DP-6 casing battery.
If your battery case has 5V USB output, you may also need to order a 5V PCB for your battery.
If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.
-
36V 10S Ebike battery PCM/BMS 20A/25A with small size for Hailong02/Jumboshark/Tigershark casing battery
36V 20A/25A 10S BMS/PCM for e-bike downtube batteries. This BMS is with small dimension(L80*W60*T10mm) with balance, ON/OFF switch, battery capacity LED and high temperature protection.
This battery management system(BMS) is suitable for most frame batteries, such as Hailong-02/03 casing battery, DA-5C Casing battery, DS-6 casing battery or new Polly DP-6 casing battery.
If your battery case has 5V USB output, you may also need to order a 5V PCB for your battery.
If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.
-
20S/24S 30A/40A/50A BMS for 60V/ 72V/84V E-motor lithium battery pack with balance LED
20S, 24S, 60V/72V /84V lihtium-ion/LiFePO4 BMS/PCM with balance for e-motorcycle 30A,40A or 50A.
The BMS has short circuit, overvoltage/undervoltage protection, over current protection etc.
COMMON port means charging and discharging use the same port.
Separate port means charging and discharging use separate port.
There balance LED on the BMS which you can check if the cells are in balance or not, or you can find the "defective" cells which are not in balance status.
-
Intelligent battery BMS 12S 13S 14S 15S 80A/100A with software/bluetooth app control
Smart lihtium battery management system/PCM for 12S, 13S, 14S or 15S Lithium LiFePO4, NiCoMn, LiMn2O4 etc diy battery packs. You can program the intelligent BMS/lithium battery on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile). Our ltihium battery BMS has been upgraded with alloy plates for better heat radiation, but the connection of the PCM has no changed. We also provide smart BMS with larger serial from 7S~10S, 11S~15S(current less than 60A), 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control.
The PCM is with blanace, standard UART COM, Short circuit protection, temperature(NTC) protection, overcharge protection, overdischarge protection, over current protection and under voltage protection etc. Some Smart BMSs are available for RS232 and RS485 COM port, please email us if you need.
This smart BMS use the same COM for charging and discharging which means the max charging current could be larger. If you need a battery charger for your diy packs, we also provide customized lihtium battery chargers.
If you need the PCM communication software, app or connection diagram, please download from here: intelligent battery management specification
-
Intelligent balance battery BMS/PCM for 6S 7S 8S 9S 10S packs with software/bluetooth app programmable
Intelligent lihtium battery management system/PCM for 7S, 8S, 9S or 10S Lithium LiFePO4, NiCoMn, LiMn2O4 etc diy packs. You can program the smart BMS/lithium battery on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile). We also provide smart BMS with larger serial from 10S~15S, 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control.
This smart BMS use the same COM for charging and discharging which means the charging current can be equal to the discharging current(but we don't sugget to charge with large current because it is not good for the battery). If you need a battery charger for your diy packs, we also provide customized lihtium battery chargers.
About thickness of the BMS, if the BMS current is large, then it will be 17mm thickness; if the serial number and current is small, then it is 10mm thick.
BMS dimension: 60 x 140 x 10mm with current <50A; 102 x 150 x 17mm with current ≥60A.
The new BMS is compatible with 485 and UART communication port.
If you need to pre-check the software or app for the BMS, please download from here: smart bms specification