54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;

36V, 48V, 52V battery charger with two charging voltages, 80% and 100% full charging voltages.

When you don't use the battery for a long time, it's better not to 100% fully charge the battery for storage.   

Full charging voltage for 36V battery: 40V and 42V; Charging current 2.5A;

Full charging voltage for 48V battery: 51V and 54.6V; Charging current 2A;

Full charging voltage for 52V battery: 55V and 58.8V; Charging current 2A;

This charger has no fuse because the fuse has been changed to the switch(switching between the two charging voltages).

The shortage for a charger without a fuse is the charger will be burned if you connect the charger reversing the positive and negative. 

The charger is with wide AC input voltage 110V -240V.

Ebike charger for 36V, 48V, 52V batteries with3 pins mini XLR connectorfor Reention casing batteries.

The full charge voltage for 36V 10S li-ion battery is 42V;

The full charge voltage for 48V 13S li-ion battery is 54.6V;

The full charge voltage for 52V 14S  li-ion battery is 58.8V;

For the charging connector, pin 1 for positive, pin 2 for negative, pin 3 is empty, this is the default connection; if your battery has a different connection, please send us an email after placing the charger.

For the charging current, each battery would have a maximum charging current, normally the default max charging current for the batteries would be 5A; if you want higher charging current, please contact your battery supplier to check what is the max charging amps of your battery first.