3-pin charging cable and charging port forJumboshark/Supershark casing battery. There are similar 3 pin charging port in the market, please make sure your battery key has the "Reention" logo, other brand 3 pin charging port would not fit. 

This charging carble and connectors are only suitable for Jumbo shark or Super shark casing batteries, Dorado batteries or other Reention casing batteries, please note.

Please make sure the pins are matching when you try to replace this charging cable to your old charging cable.

This charging cable enables your battery can be charged with larger current.

The cable length is 100cm.

Please check the below video for how to replace the charging cable from the inside of the charger:

Rack battery connector with 6 blade pins for ebike.

We have several rack batteries and connectors; this connector is for this rack battery

Ebike new polly /Jumboshark battery mounting foot.

There are two types of New polly battery mounting foot, please check the pictureS before ordering. There is also a easy way to identify the two mountings: one is with 4 blade contacts socket and the other is with 5 blade contacts socket

This mounting foot is suitable for New polly DP-4C, DP-5C, DP-6C, DP-9C, DP-2170-4C and DP-2170-5C. 

The mounting here is with 4 blade contacts sockets.

Reention Rhino battery case for ebike; therefore are several Rhino cases, the difference is the length, width and height, please double check your own cases before ordering.

If you are looking for Dengfu E55 E56 frame intube case, the size would be 441 x 108 x 80mm(the length 441mm including the plastic battery cover).

The case is with 5.5X2.1DC charging port and battery level LED.

If you need batteries, we can also produce the battery for you.