1200W 12V 50A (14.6V, 12.6V or 16.8V)charger for lithium ion battery, LiFePO4 battery or Lead acid battery. Fast charging, easity to carry; over-current protection, over-charging protection, shortcircuit protection and reverse connect protection are available for the charger. Smart charger with three charging mode: CC, CV and 
trickle charging. Charging current and voltage can be read by the LED on the charger.

42V2.5A silent charger for 36v lithium ion battery. This charger is with alloy shell and cooling fan, but it has no noise. It is new designed charger for silent charging. If your battery is 36V Li-ion battery, then this charger is suitable for you. 

Charging connector: DC connector, which is suitable for 36V Hailong-01 casing battery, tigershark 36V battery（DS-6）, 36v bottle battery, new polly 36V battery, and frame DA-5C battery.

The leadtime for the charger is about a week, please note.

Alloy shell charger 1200W for lithium ion, LiFePO4 or Lead acid batteries. Charging voltage and current are as follows: 12V50A, 24V30A, 36V25A, 48V20A, 60V15A, 72V12A; The charger will stop charger after fully the battery charged.  The charger has an LED display and you can view charging voltage and charging current when charging. 

900W battery charger for petrol car, golf car, electric car, seesighting car, electric motor cycle batteries. Charging voltage and current are as follows: 12V40A, 24V25A, 36V18A, 48V15A, 60V12A, 72V10A; customized charging voltage is available, please email us if you have need special charging voltage for the battery charger;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

36v lithium downtube battery charger 180W 42V 4A Alloy shell charger with DC connector.

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Charging connector: 2.5DC connector(default); there are two DC connectors, 2.5DC and 2.1DC; if you are not sure your charging port is 2.1DC or 2.5DC port, please add an extra 2.1DC cable for backup, once the default 2.5DC connector is not suitable for your charging port, you can change to 2.1DC connector;

36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.  

1500W Alluminum alloy shell charger for e-motorcycle, sightseeing bus,  tourism bus, electric car or ev batery. We can set customized charging voltage and charging current for the battery charger. 12V80A, 24V40A, 36V30A, 48V25A, 60V20A, 72V15A, 84V10A, 96V10A etc.

There are LED indicators for charging and chared status.

Alluminum alloy shell and cooling fan enable the charger will not too be hot when charging.

The handle bar makes the charger to be carried easily.

If you don't know what voltage is your charger, please email us and we will calculate the charging voltage for you.

Ebike charger for 36V, 48V, 52V batteries with3 pins mini XLR connectorfor Reention casing batteries.

The full charge voltage for 36V 10S li-ion battery is 42V;

The full charge voltage for 48V 13S li-ion battery is 54.6V;

The full charge voltage for 52V 14S  li-ion battery is 58.8V;

For the charging connector, pin 1 for positive, pin 2 for negative, pin 3 is empty, this is the default connection; if your battery has a different connection, please send us an email after placing the charger.

For the charging current, each battery would have a maximum charging current, normally the default max charging current for the batteries would be 5A; if you want higher charging current, please contact your battery supplier to check what is the max charging amps of your battery first.