36v lithium downtube battery charger 180W 42V 4A Alloy shell charger with DC connector.

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Charging connector: 2.5DC connector(default); there are two DC connectors, 2.5DC and 2.1DC; if you are not sure your charging port is 2.1DC or 2.5DC port, please add an extra 2.1DC cable for backup, once the default 2.5DC connector is not suitable for your charging port, you can change to 2.1DC connector;

36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;

Charging cable with 5.5DC*2.5DC connector;

Charging port: 5.5*2.5DC port, 5.5*2.1DC port; charging port is installed on our Hailong-01 battery case , polly DP-6 battery case, tigeshark DS-6 case or frame DA-5C battery case.

There are two types of this kind of connector, 5.5*2.5DC and 5.5*2.1DC;  2.5DC connector is normally used for charging current ≥4A; 2.1DC connector is used for charging current <4A;

The male 5.5*2.5DC connector is compatible with 2.1 and 2.5DC port; if you are not sure your charging port is 2.1 port or 2.5 port, you can choose the 2.5DC connector.

If your original connector is damaged, you can just cut the old plug, wire with new connector with the small red cable and black cable;  Our 2.5DC connector is with red anode and black cathode as default. For your original charger, it would be better for you to identify the positive and negative cables before wire the new connector.

Note: the space between the contacts are close, it's better to make the other two contacts insulated when soldering to avoid the welder touching other contacts causing a short circuit.

For how to change to the 5.5X2.1DC or 5.5X2.5DC cable from inside of the charger, please check below video:

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.  

1500W Alluminum alloy shell charger for e-motorcycle, sightseeing bus,  tourism bus, electric car or ev batery. We can set customized charging voltage and charging current for the battery charger. 12V80A, 24V40A, 36V30A, 48V25A, 60V20A, 72V15A, 84V10A, 96V10A etc.

There are LED indicators for charging and chared status.

Alluminum alloy shell and cooling fan enable the charger will not too be hot when charging.

The handle bar makes the charger to be carried easily.

If you don't know what voltage is your charger, please email us and we will calculate the charging voltage for you.

2000W alluminum alloy shell battery charger for golf car, electric car, forklift battery, electric floor scrubber battery, electric lawn mower battry etc. If you are looking for faster charger, this one would be suitable for you; if you are searching for customized charger, we can supply.

Input for the battery charger: Input: 100VAC~ 240VAC 50HZ/60HZ

Cut-off current for Lithium battery is 5% of CV as default, and it can be set between 3-10% for customers' request.

Black housing for the battery charger is also available.

Ebike charger for 36V, 48V, 52V batteries with3 pins mini XLR connectorfor Reention casing batteries.

The full charge voltage for 36V 10S li-ion battery is 42V;

The full charge voltage for 48V 13S li-ion battery is 54.6V;

The full charge voltage for 52V 14S  li-ion battery is 58.8V;

For the charging connector, pin 1 for positive, pin 2 for negative, pin 3 is empty, this is the default connection; if your battery has a different connection, please send us an email after placing the charger.

For the charging current, each battery would have a maximum charging current, normally the default max charging current for the batteries would be 5A; if you want higher charging current, please contact your battery supplier to check what is the max charging amps of your battery first.