38140S/38120S headway battery cell connector

Headway cell 38120S holder, 38140S holder: one hole, two holes and three holes. 1H and 3H 38120 cell holders are in black color, and the 2H cell holder is in orange. By the way, the orange holder is about 2mm thinner than 1H and 3H cell holders, please be noted.

1H and 3H black cell holders are compatible; 2H orange cell holders are origincal headway cell holders which are not compatible with 1H/3H black cell holders.

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.  

48V 14AH /48V17.5AH Ebike in-tube battery(SYR case), There are two lengths for this case, the shorter case(L-=354mm) is for Aventon level replacement battery; The longer case(L1=442mm) is for other intube ebike battery, such as Markhor frame intube battery. 

If you are looking for Aventon level replacement battery, only the shorter case will fit and the shorter can can max build 48V14Ah battery, please note.

There are several similar cases with different sizes, please double check before ordering. If your case sizes are the same as ours, please double check the discharging connector because with the same sizes, there are two types of connectors, 4 pins connector and 6 pins connector, they are not compatible. Please check our pictures for details.  If you are confused, please email us, send us some pictures of your current battery and we will check for you.

If you are looking for 52V17.5AH with the longer case, we can also build it, please email us if you need.

48V Hailong G70 battery for ebike.

 The mounting is included with the battery; Key lock is available to lock the battery on the battery mounting foot.

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

Charging port is 5.5X2.1DC or 5.5X2.5DC

Charging voltage for the 48V battery is 54.6V; recommend to charge the battery with <5Amps.

Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be installed on the frame down-tube. 

48V 17.5AH intube battery for Dengfu Carbon fibre ebike frame.

The charging port is 5.5X2.1DC as default..

The battery itself has no ON/OFF switch. The original Dengfu frame(E10/ E22/ E23) has an ON/OFF switch and a charging port on the frame. Therefore if you are looking for the battery for the original Dengfu frame, this one can be plug and play.

Important: If your existing Dengfu frame has no ON/OFF switch and charging port on the frame, please advise us and will modify the connection of the battery socket specially. 

48V 14AH Reention EEL battery for ebike. This battery is installed in the bike tube; there are 4 types of these cases with different length and width. Our battery case is with L1*L2 = 430 X 354mm, and with width*height being 64*94mm. Please measure your case's sizes before ordering the battery.  You can also check the picture on our website for the case.

NCM Moscow M3 Magnum Ebike Replacement Battery.

This battery can be the replacement battery for Ride1up Core-5 or Ride1up LMT'D ebike. 

Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be install on the duwntue. 

There are basically two types of fuel tank cases, all is the same except different height.

The battery mounting foot is included.

We build the batteries with Premium cells: Panasonic NCR18650BD,  Samsung INR18650 35E, LG INR18650 MJ1 or Samsung INR21700 50G cells.

52V 20AH Battery for Dengfu E55 or E56 frame, made by Samsung INR21700 50G cells.

If you choose the smart BMS for the battery, you can view the battery parameter via mobile app.

30A BMS for 750W-1000W motor;

40A BMS for 1000W-1500W motor;

50A BMS for 1500W-1800W motor.