Power cable for Dorado battery, Tigershark case, Atlas case or other Reention casing battery with PLA 0273 male connector , 5 pin PLA 0049 or 6 pin PLA 0238 connector; If you order the power cable, it is better for you to choose Ø4mm bullet connector, Ø5mm bullet connector or bare wire for the end connector for controller/motor because there is a small wire rubber O seal on the mounting, other connectors would be too big to go though the wire seal(you may need to let the wire go through the wire O seal, then solder the larger connectors). The connector is soldered with cable which you can replace your old plug on the battery easily by removing the lock screw.

If you need a extension cable or conversion wire for your battery, then the big connector is not a problem. But please make sure you choose the right male or female connector when placing the order.

This power cable is suitable for the Atlas casing battery, 36V Dorado battery, 48V Dorado batteries or the Tigershark casing battery. 

The 2 pin PLA 0273 connector is the male connector(installed in the battery mounting base), it's matching 2 pin female connector is PLA 0274 connector which is installed on the battery body;  Note, the PLA 0274 looks like 5 pin connector, but the three small pins are empty, therefore we call it "2 pin" connector.

The 5 pin PLA 0049 connector is the male connector(installed in the battery mounting base), it's matching 5 pin female connector is PLA 0050 connector which is installed on the battery body;

The 6 pin PLA 0238 connector is the male connector(installed in the battery mounting base), it's matching 6 pin female connector is PLA 0239 connector which is installed on the battery body;

The default wires are 12 AWG wire, if you need 10AWG wire, please email us separately. By the way, 10AWG wire for power cable, they may be too large for the wire seal of the mounting unless you discard the wire seal when installing the power cable.

36V14AH lithium ion bottle battery for electric bicycle, 345x91mm(Height x Diameter), made with LG INR18650 MJ1 cells, Panasonic NCR18650BD, Samsung INR18650-32E or Samsung INR18650-35E(10S4P); including mounting cardle. The larger capacity, the longer road you can ride with the bike.

ON/OFF switch on the bottom of the battery;

LED capacity indicator on the head of the battery to check battery capacity.

The key lock enables the battery fastens on the mounting cradle.

Rack battery 36V for ebike: This battery has a taillight with its case, battery capacity level is also available. The battery has a fuse too. Power switch and key lock are also available for the battery which you don't worry your battery will be stolen. 

If you also need a rack for the battery, please note our rack is only suitable for 26" bike with V-brake. It will not fit for disc brake.

The battery case has a space for ebike controller, please double check the controller size before considering put the controller with the case.

Safety note: we don't recommend the 36V 500W motor to work with this battery because the discharging connector cannot bear 25A current continuously according to the case supplier.

If you need an extra connector for this battery, please click here: 6 pin rack battery connector 

36V ebike compact battery with customized battery size and light weight. BMS-10S-25/60A is built in with the battery; alloy chargers for options. The battery is made by premium cells; it has no battery case, but we have cell holders for building the battery to protect the cells.