This battery can be a replacement battery for SUPER73 S or S1 ebikes.

1. Battery Capacity: 11.6AH, 14AH, 14.5AH, 15AH, 16AH, 17.5AH, 20AH, 21AH, 24.5AH etc; 

2. Cells for building packs: Panasonic NCR18650BD, Samsung INR18650 32E, Samsung INR18650 35E,  Samsung  INR21700 50G, LG INR18650 MJ1.

3. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port); If you prefer mini XLR connector for charging, you can choose it.

4. Max charging current: 5A

5. Discharging port:  4pins blades contacts connector. If you need an extra mounting foot for this battery, you can order on our website: New polly mounting foot

6. Continuous discharging(BMS): 15A(for 350W motor), 20A(for 500W motor), 25A(for 750W hub motor), 30A(for 1000W engine), 40A for 1500W motor, 50A for 2000W ebike.

7. If you choose the smart BMS for the battery, you can view battery parameter via mobile app.

Note: There are mainly two typles New polly cases with different discharging connector and mounting foots, please check the picture on our website. If your discharging connectors are with 5pin discharging connector, your New polly Jumbo chark battery should be with this one: 48V New polly battery without controller space

48V ebike tube battery, made by Samsung INR18650 35E or Panasonic NCR18650BD cell, or Taiwan Molicel INR18650 P26A.

If your motor is with 1500W or 2000W, then the Taiwan Molicel INR18650 P26A would be suitable for you because it has a high discharging rate; If you leave in a cold country and will use the bike in winter, then the Taiwan Molicel INR18650 P26A is also suitable for you because it can work under -40 degree. If you prefer the Samsung or Panasonic cells for your high power motorcycle, please choose higher AH for the battery, small AH with larger discharging current is not good for battery lifespam. 

We can build the batteries with your demand dimensions. You can have a rough size calculation according to single cell dimension: 18*65mm(Diameter * Height), 13S4P layout means 13*4=52pcs cells, 13S5P=65pcs cells etc. Leave some extra space for the cell holders and BMS(normally 80x60x12mm for small current, and 100 x 140x 15mm with larger current.). If you don't know how to calculate the dimension and AH, please email us.

Electric bike lithium ion battery 48V Atlas with 5V USB output for charging cell phone or ipad. This battery made by high quality cells is designed for fixing on bicycle frame. Alloy chargers for options. The battery has more capacity and you can ride more distance after fully charged. The distance depends on weight, speed and capacity.

48V15AH Headway battery made by 40152 cell, weight 8.2kg/18lbs, size168x190x188mm or 88x170x355mm including BMS, max continuous discharge current being 150A and max charging current being 45A.

48V high capacity lithium ion frame battery for ebike. It could be a powerbank because it has a 5V USB output for mobile or ipad charging. It is high power and can run long distance per charge.  A 180W54.6V3A charger is included with the battery. If you are running a Bafang BBS kit and want a high power battery, this one would be suitable for you.

Power cable for Dorado battery, Tigershark case, Atlas case or other Reention casing battery with PLA 0273 male connector , 5 pin PLA 0049 or 6 pin PLA 0238 connector; If you order the power cable, it is better for you to choose Ø4mm bullet connector, Ø5mm bullet connector or bare wire for the end connector for controller/motor because there is a small wire rubber O seal on the mounting, other connectors would be too big to go though the wire seal(you may need to let the wire go through the wire O seal, then solder the larger connectors). The connector is soldered with cable which you can replace your old plug on the battery easily by removing the lock screw.

If you need a extension cable or conversion wire for your battery, then the big connector is not a problem. But please make sure you choose the right male or female connector when placing the order.

This power cable is suitable for the Atlas casing battery, 36V Dorado battery, 48V Dorado batteries or the Tigershark casing battery. 

The 2 pin PLA 0273 connector is the male connector(installed in the battery mounting base), it's matching 2 pin female connector is PLA 0274 connector which is installed on the battery body;  Note, the PLA 0274 looks like 5 pin connector, but the three small pins are empty, therefore we call it "2 pin" connector.

The 5 pin PLA 0049 connector is the male connector(installed in the battery mounting base), it's matching 5 pin female connector is PLA 0050 connector which is installed on the battery body;

The 6 pin PLA 0238 connector is the male connector(installed in the battery mounting base), it's matching 6 pin female connector is PLA 0239 connector which is installed on the battery body;

The default wires are 12 AWG wire, if you need 10AWG wire, please email us separately. By the way, 10AWG wire for power cable, they may be too large for the wire seal of the mounting unless you discard the wire seal when installing the power cable.

Dual battery converter with wide DC input 24V -72V. 

Output: DC 24V -72V, max 30A or 40A current. 

Input with XT60 male connector; output with XT60 female connector. 

If you have two batteries(24V-72V),  you want to use the two batteries with one ebike, then you can connect the two batteries with the dual battery converter.  

When you are going to charge the battery, please switch one of the batteries first before charging because the dual battery converter only protect the two batteries discharging; it has no protection for simultaneous charging.