48V Dorado battery for ebike,14AH, 17.5AH, 20AH, 21AH, or 24AH for your choice. If you want a longer mileage, you can choose the max capacity 24AH. If your motor is 1000W-1800W, then our Dorado battery will fit your ebike.

The mounting bases for the Dorado batteries are the same, if the length is the same, then you can choose this battery as a spare battery. There are only two lengths for the Dorado cases, L1=458mm or 390mm, some people would like to measure the longest part of the battery, and get 505mm or 440mm to check which model you need to choose. 

There is a 5V USB output for the Dorado case which you can charge your mobile; 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

For the discharging connector, the default connector is 2pin connector(female PLA0274 and male PLA0273); if your ebike runs larger current, it's better to use 6pin connectors(female PLA 0239 and male PLA 0238); Normally most of the e-bikes for power less than 750W will use 2 pin connectors. If you are confuse for the connectors, please check on our website: Tigershark / Atlas/ Dorado connectors

 If you don't know which charging and discharging connector to choose, please email us.

This battery can be a replacement for Biktrix standard battery, NCM moscow Milano Plus/Venice Plus/Moscow Plus/Aspen Plus/Miami ebike batteries, 

Dorado battery (505L) is suitable for e-bikes which from ECCOBIKE/ ADDMOTOR/ VOLTBIKE/ CIVI/ M2S/ Surface 604 bikes/ Rambo/ Quietkat/ BAKCOU....etc, while 440L Dorado battery fits for the max-cargo and G20-CARGO electric bike.

Aventon Pace 500 replacement battery.If you want a larger WH battery for the Aventon Pace 500, you can order on our website.

48V in-tube battery for ebike down tube frame.

There are several types this model battery cases with different sizes, the downtube for your bike is fixed, therefore the battery case is also fixed(cannot interchangeable with other cases), please double check before ordering. The in-tube battery here is suitable for this bike frame: e-MTB full suspension ebike frame for Bafang M510 M500 M600 or M620 motors.

If you choose the smart BMS for the battery, you can view battery parameter via mobile app. 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

 This battery can be used for Ride1UP Cafe Cruiser 700 SERIES electric bike or Himiway Zebra Zebra Step Thru ebike. The length for the battery with cover is 441mm, please measure your original case height and width before ordering.

Important note: The batteries are not compatible with different size. Therefore please make sure you choose the right size for your battery.

48V 17.5AH intube battery for Dengfu Carbon fibre ebike frame.

The charging port is 5.5X2.1DC as default..

The battery itself has no ON/OFF switch. The original Dengfu frame(E10/ E22/ E23) has an ON/OFF switch and a charging port on the frame. Therefore if you are looking for the battery for the original Dengfu frame, this one can be plug and play.

Important: If your existing Dengfu frame has no ON/OFF switch and charging port on the frame, please advise us and will modify the connection of the battery socket specially. 

Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be installed on the frame down-tube.