Smart lihtium battery management system/PCM for 12S, 13S, 14S or 15S Lithium LiFePO4, NiCoMn, LiMn2O4 etc diy battery packs. You can program the intelligent BMS/lithium battery on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile). Our ltihium battery BMS has been upgraded with alloy plates for better heat radiation, but the connection of the PCM has no changed.  We also provide smart BMS with larger serial from 7S~10S, 11S~15S(current less than 60A), 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control. 

The PCM is with blanace, standard UART COM, Short circuit protection, temperature(NTC) protection, overcharge protection, overdischarge protection, over current protection and under voltage protection etc.  Some Smart BMSs are available for RS232 and RS485 COM port, please email us if you need.

This smart BMS use the same COM for charging and discharging which means the max charging current could be larger. If you  need a battery charger for your diy packs, we also provide customized lihtium battery chargers.

If you need the  PCM communication software, app or connection diagram, please download from here: intelligent battery management specification

Intelligent lihtium battery management system/PCM for 7S, 8S, 9S or 10S Lithium LiFePO4, NiCoMn, LiMn2O4 etc diy packs. You can program the smart BMS/lithium battery on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile). We also provide smart BMS with larger serial from 10S~15S, 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control. 

This smart BMS use the same COM for charging and discharging which means the charging current can be equal to the discharging current(but we don't sugget to charge with large current because it is not good for the battery). If you  need a battery charger for your diy packs, we also provide customized lihtium battery chargers.

About thickness of the BMS, if the BMS current is large, then it will be 17mm thickness; if the serial number and current is small, then it is 10mm thick.

BMS dimension: 60 x 140 x 10mm with current <50A; 102 x 150 x 17mm with current ≥60A.

The new BMS is compatible with 485 and UART communication port.

If you  need to pre-check the software or app for the BMS, please download from here: smart bms specification

This is a smart lithium battery  management system(BMS) which can be used for either Li-ion batteries or LiFePO4 batteries. It can use for 11S, 12S, 13S, 14S or 15S batteries. You can program it on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile) when outside. The battery pcm has been upgraded with alloy plates for better heat radiation, but the connection of the PCM has no changed. If you need the bms communication software, app or connection diagram, please download from here: details and docs of smart BMS. 

We also provide ohter intelligent lithium battery BMS with larger current from 7S to 10S, 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control. 

The battery BMS is with NTC temperature protection, short circuit protection, over/under voltage protection, over current protection etc.

This Smart PCM use the same COM for charging and discharge which means the charging current can be equal to the discharging current(but we don't suggest charging current to be too large because it is no good for battery). We can also provide customzied charger which compatible with the smart BMS.

If you are going to install the battery with casing which has an ON/OFF switch, then you may need the BMS to have a ON/OFF function leads for connecting to the case's switch. In this case, you can choose the ON/OFF switch for the BMS.

The Smart BMS has upgraded. It's compatible with UART COM and 485 COM.

Smart BMS for 20S, 21S, 22S, 23S, 24S, 25S, 26S, 27S, 28S, 29S, 30S LiFePO4 or Lithium-ion batteries. You can set the battery parameter with your computer or cell phone. The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile. The max current can be 100A for this BMS.  By the way, please set the recycle capacity to be 80% of the rated capacity/actual capacity. If you need the software, app and connection diagram,  please download from here: Smart BMS software/app/diagram.

If you need a charger for the smart BMS, we can also provide: customized charger.