E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.

Bafang BBS01 mid motor for 36V e bikes: 36V250W, 350W, 500W with C961 or C965 LCD display, EB-BUS cable set, brake lever, speed sensor etc. This kit is high torque and easy assembling for electric bicycle conversion. The 8FUN BBS01 mid crank kit has built-in controller and PAS. Installation tools will be provided free of charge. 

For some Europe customers' demand, we sourced some 36V350W BBS kit with no marks(They want to use 350W motor but the law requires no more than 250W); if you want 350W bbs kit with no "350W" mark on the motor, we can provide it to you. You can identify the motor power by the code of the BBS controller.

Ebike brushless hub motor torque washers;12mm diameter with a flat of 10mm

Bafang FM G311 light weight front driving motor with high speed.

8FUN FM G311 front motor 36V 250W is compatible with disc brake; it is a hall sensored motor and can work with the sine wave controller and displays.

It is with 9pin motor cable.

The motor has a larger reduction ratio(1:11) beause it is signed to have an inner rotor which enables the motor power can be released effectively. 

Speed for the motor is rated 25km/h.

The motor is black or silver color.

Motor cable is included, the cable length will be shipped randomly if you don't have special requirement because we have several motor cable lengths and two types of motor hall connector, If you have demand for the cable length and motor cable hall connector, please leave us a message.

Motor cable with 9 pin waterproof connector, male and female; male cable length 0.4m; female cable length: 85cm, 100cm or 150cm for option

If you order the female part, please also choose the motor hall connectors; if you don't choose the motor hall connectors, we will ship with the connector randomly.

If you don't know which connectors to choose, you can check our controllers, our controllers use the 6P DJ7061 connectors and 2.8pins for motor hall as default.

If you need longer wire for the motor, you can add a 9pin extension motor wire for your motor.

Engine opening tool for bafang bldc hub motors, such as SWXK, SWXK5, BPM2 etc 4 slots motor cover. 

Ebike brushless hub motor spare parts, washers, nuts etc., end plastic cap, or Bafang rear hub motor freewheel spacer.

Bafang BBS01/BBS02 Secondary Reduction Metal Gear/Chainring Gear;

If the teeth which engages the pawl clutch is worn, then you can order this reduction gear to replace it.

Note: This reduction gear is only fit for BBS01 or BBS02, it isnot suitable for BBSHD kit.