E-Bike Kit
-
Bafang BBSHD / BBS03 axle shaft rubber seal
Bafang BBSHD axle rubber seal for replacement.
If you open your BBSHD, then you may need to break the crank shaft rubber seal.
-
Bafang BBS /M620 /M400 UART motor programming cable
Bafang BBS /UART M620 /UART M400 motor programming USB cable; Cable length: 45mm
If you want to change parameter of your bbs controller, you can use this programming cable. If you want to know what parameter you can change, please see the pictures on our website.
Please note: Making changes to your original motor/controller software may void warranty of your motor/controller. Improper changes may cause damage of your battery or motor, please do a little research on the internet before programming.
If you need the software for programming the BBS, please click here: Bafang system programming
If the software does not work, please click the latest version: BBS programming 2020 version
-
BBSHD gasket for motor core
BBSHD gasket for Bafang HD stator or BBSHD motor core.
-
BBS01/BBS02 chainring spacer(1mm thick alloy spacer)
BBS01/BBS02 chainring spacer 1mm; to be used for BCD104, BCD110, BCD130 chainwheel spider.
Aluminum Spacer 1mm thick
-
Bafang BBS mini color display 500C
Bafang BBS01B, BBS02B, BBS03B, BBSHD compact colour display 500C; this smart display is suitable for Bafang bbs01, bbs02, bbs01b, bbs02b, bbs03b or BBSHD kits. It can be a substitute for C965, C961 or DPC18 displays.
If you need the users manuals, please download from here: BBS 500C color display users' manual
-
Bafang BBS01 BBS02 wire rubber seals for bbs motor phase
Bafang BBS01 BBS02 wire rubber seals for bbs motor phase, the price includes 3pcs rubber seals because one bbs motor has three motor phase wires.
Note: these seals don't fit for BBSHD motor phase wires.
-
Bafang BBS01 BBS02 BBSHD power cable for extension or conversion
Bafang BBS power cable for extension or conversion.
The connector can be BBS01/02 default bullet connector, BBSHD Anderson connector, Amass XT60 connector, Amass XT90 connector.
Cable length could be 10-100cm for your demand;
Wre: 12AWG black/red wire;
If your current Bafang motor and the battery are with different connector, then you may need a conversion cable.
If your ebike battery power cable is too short, then you may need a extension cable.
-
Bafang BBSHD pawl clutch/ pedal freewheel
BBSHD pawl clutch for replacement. If your BBSHD could not pedal smoothly, it could be that the BBSHD freewheel have problem.
-
Bafang BBS01 /BBS02/ AEG PAS Magnet Disc Ring
Bafang/8FUN BBS01/BBS02 PAS magnet disc ring for replacement. This magnet cannot fit for BBSHD, please note.
If you need the BBS PAS circuit for repair, please click here: BBS PAS circuit
There is a C clip ring to fastern the magnet disc, if you need the plier to remove the clip ring, please click here: plier for C clip ring
-
Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400
DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.
CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.
The display has 5 level assisting and 6km walk assisting.
The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.
The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.
The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).
The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual