Bafang M560 /G5300 48V 500W 750W motor kit. We have matching alloy frame or carbon fibre frames for the M560 motors, please email us if you need the frame for the motor.

There are two types hangers for M560 motors, and the matching guards and motor cover are also different accordingly. Please check your own hanger before ordering.

If you don't have a hanger for the motor, you can also add a hanger with the kit.

The motor is with CAN protocol. Please let us know the wheelsize and speed you need, and we will set them before shipping.

Bafang has upgraded the M560 motors in 2024, the upgraded motors are silent than the previous version.

If you need the bike frame for the M510 kit, please click here: Bafang M510 full suspension bike frame

250W ebike brushless controller, 24V and 36V compatible, including LCD meter, 8 poles PAS and speed sensor.This controller reduces motor noise and you will feel the torque is stronger when changing the PAS level via the LCD panel. It is sine wave controller with torque simulation function. The controller is suitable for sensored motor only, please be noted. If you want a colorful display, you can choose LCD1, LCD3, LCD5, LCD6(coming soon),  LCD7U, LCD8S or LCD8H.  If you need LED meter, you can consider KT-890 LED or KT-900S LED meter.

Do not know which LCD meter to choose, click here fore brief comparision for the above LCD meters:  KT-LCD1/LCD2/LCD3/LCD5

E-bike Kuntent KT LCD7U  meter with 5V1A charging USB port for mobile. The LCD7U display is compatible with 24V, 36V and 48V; you can read the battery capacity and votlage, riding speed and range, accumulated mileage etc. This LCD meter must work with KT serial controllers.

If you need the users' manual for the display, please check from here: KT LCD7U user's manual

If your controller is with waterproof connector, you can add a conversion cable for this LCD meter.

ABS controller case for ebike controller;

Small case is suitable for  250W controller-GBK-CON611, CON621 or CON63, can be mounted on the frame of bicycle;

Larger case is suitable for CON94 350W controller, can be mounted on ebike frame;

E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.

Bafang Fat-bike motor controller 48V 750W for RM G060.750D or FM G060.750D motors: this controller only work with  Bafang UART display(connecting via the Bafang EB-BUS); without the Bafang LCD and EB-BUS, the controller will not work.

This controller will not work for the 500W Bafang motor, because the 500W motor uses a small 9 pins connector while this 750W controller uses the "big" 9 pins connector.

There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery).  We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.

The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.