Controller
-
$800.00Bafang M560 /G5300 motor kit 48V 500W 750W(2024 silent version)
Bafang M560 /G5300 48V 500W 750W motor kit. We have matching alloy frame or carbon fibre frames for the M560 motors, please email us if you need the frame for the motor.
There are two types hangers for M560 motors, and the matching guards and motor cover are also different accordingly. Please check your own hanger before ordering.
If you don't have a hanger for the motor, you can also add a hanger with the kit.
The motor is with CAN protocol. Please let us know the wheelsize and speed you need, and we will set them before shipping.
Bafang has upgraded the M560 motors in 2024, the upgraded motors are silent than the previous version.
If you need the bike frame for the M510 kit, please click here: Bafang M510 full suspension bike frame
-
$86.00Bafang 1000W/ 750W 48V Fat-bike motor controller
Bafang Fat-bike motor controller 48V 750W for RM G060.750D or FM G060.750D motors: this controller only work with Bafang UART display(connecting via the Bafang EB-BUS); without the Bafang LCD and EB-BUS, the controller will not work.
This controller will not work for the 500W Bafang motor, because the 500W motor uses a small 9 pins connector while this 750W controller uses the "big" 9 pins connector.
There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery). We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.
The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.
