Jumbo shark casing battery connecotor: male and female. It has 5 blade contacts for the connector. There are two types of New Polly case connectors, one is with 5 blade contacts and the other is with 4 blade contacts; they are not compatible, please make sure you order the right connectors.

This 5pins connector is stuiable for the Jumbo shark case, if you are not sure it fits your case or not, please check the complete case dimension first.

This connector is suitable for Super73 R, RX and S2 series batteries. If you need a replacement battery for Super73 R, RX or S2, we can also provide it with larger WH.

3-pin charging cable and charging port forJumboshark/Supershark casing battery. There are similar 3 pin charging port in the market, please make sure your battery key has the "Reention" logo, other brand 3 pin charging port would not fit. 

This charging carble and connectors are only suitable for Jumbo shark or Super shark casing batteries, Dorado batteries or other Reention casing batteries, please note.

Please make sure the pins are matching when you try to replace this charging cable to your old charging cable.

This charging cable enables your battery can be charged with larger current.

The cable length is 100cm.

Please check the below video for how to replace the charging cable from the inside of the charger:

Rack battery connector with 6 blade pins for ebike.

We have several rack batteries and connectors; this connector is for this rack battery

Ebike new polly /Jumboshark battery mounting foot.

There are two types of New polly battery mounting foot, please check the pictureS before ordering. There is also a easy way to identify the two mountings: one is with 4 blade contacts socket and the other is with 5 blade contacts socket

This mounting foot is suitable for New polly DP-4C, DP-5C, DP-6C, DP-9C, DP-2170-4C and DP-2170-5C. 

The mounting here is with 4 blade contacts sockets.

Rubber spacer for New Polly /Jumbo shark/ Tiger shark /Atlas battery mounting.

There are two types of new polly mounting foots, one is with 4 pin socket and the other is with 5 pin socket; the 5 pin socket new polly casing battery would need 4 spacers while the 4 pin mounting base would need 3 rubber spacers.

The tigershark casing battery needs 3 spacers;

The Atlas battery needs 3 spacers.

The rubber spacer would be also suitable for other Reention downtube mounting batteries; the rubber spacers arrived in April, for the mounting rails of Reention cases, such as new polly battery, atlas downtube battery and tigershark battery, we will include the rubber spacers with the shipment.

Power cable for Dorado battery, Tigershark case, Atlas case or other Reention casing battery with PLA 0273 male connector , 5 pin PLA 0049 or 6 pin PLA 0238 connector; If you order the power cable, it is better for you to choose Ø4mm bullet connector, Ø5mm bullet connector or bare wire for the end connector for controller/motor because there is a small wire rubber O seal on the mounting, other connectors would be too big to go though the wire seal(you may need to let the wire go through the wire O seal, then solder the larger connectors). The connector is soldered with cable which you can replace your old plug on the battery easily by removing the lock screw.

If you need a extension cable or conversion wire for your battery, then the big connector is not a problem. But please make sure you choose the right male or female connector when placing the order.

This power cable is suitable for the Atlas casing battery, 36V Dorado battery, 48V Dorado batteries or the Tigershark casing battery. 

The 2 pin PLA 0273 connector is the male connector(installed in the battery mounting base), it's matching 2 pin female connector is PLA 0274 connector which is installed on the battery body;  Note, the PLA 0274 looks like 5 pin connector, but the three small pins are empty, therefore we call it "2 pin" connector.

The 5 pin PLA 0049 connector is the male connector(installed in the battery mounting base), it's matching 5 pin female connector is PLA 0050 connector which is installed on the battery body;

The 6 pin PLA 0238 connector is the male connector(installed in the battery mounting base), it's matching 6 pin female connector is PLA 0239 connector which is installed on the battery body;

The default wires are 12 AWG wire, if you need 10AWG wire, please email us separately. By the way, 10AWG wire for power cable, they may be too large for the wire seal of the mounting unless you discard the wire seal when installing the power cable.

Reention Dorado battery mounting base, head mounting base and bottom mounting base. The Dorado key lock is included with the mounting base.

The mountint bases for all the Dorado batteries are the same.

Normally the default discharging male connector is 2 pin(the part number is PLA0273, you can check your own connector's part number first); some ebikes needs larger discharging current, and the battery will use 6 pin connector for the battery(the part number is PLA0238). You can choose the one you need.

If your original connector is still in good condition, you don't need to choose the connector; just install your original connector with the mounting.

Ebike New polly /Jumbo shark battery connector(4 pins). There are two types of New polly connector, one is with 5 pins and other is with 4 pins, the two connector cannot be interchangeable. Please check your own battery connector before ordering. 

If you need the 5 pins New polly socket/connector, please order here: 5 pin New polly connector

Ebike Jumboshark/supershark casing battery mounting foot; This battery mounting is suitable for small Jumboshark casing battery, larger Jumbo shark casing battery and super shark casing battery. If your battery has an built-in controller, this battery attachment would not fit, please note.