36V Jumbo shark new polly downtube battery with more capacity(Ah)

36V Jumbo shark new polly downtube battery for ebike(new polly DP-6 casing, it can put max 70pcs 18650 cells).  Larger capacity will be available with this battery case; the larger capacity the battery has, the longer distance you can ride with your ebike each time after fully charge. If you are running a Bafang BBS kit and want more capacity(Ah) for the battery, this one would be suitable for you. On/Off switch and LED capacity level showing are available for this battery.

1. Battery Capacity: 11.6AH, 13.4AH, 14.5AH, 16.75AH, 17.4AH, 20AH, and 23.45Ah are available;

2. Cells for building packs: NCR18650PF(2900mAh), INR18650-35E(3350mAh) or NCR18650GA(3450mAh).

3. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port);

4. Max charging current: 5A

5. Discharging port: 5pins blade contacts connector;

6. Continuous discharging(BMS): 20A or 25A

36V li-ion new jumbo shark downtube battery for electric bicycle. You can get larger capacity with this new polly casing battery.

1. Rated capacity: 11.6AH~ 24AH depends on the cells for building the pack; the more capacity the battery has, the longer distance you can ride with each charge

2. Voltage: 36V

3. Charging Voltage: 42V

4. Discharge cutoff voltage: 27.5V

5. Cell:  NCR18650PF(2900mAh), NCR18650GA(3450mAh) or INR18650-35E(3350mAh);

6. Standard charging: 0.2C constant current(CC) charge to 42V, then constant voltage (CC) 42V  charge till charge current decline to ≤0.05C

7. Continuous discharge current:  20A or 25A, 

8. Pulse/Max discharge current: 100A

9. Max charging current : 5A(limited by the charging port of the battery case)

10. Charging temperature: 0~45℃

11. Dischargeing temperature: -20~55℃

12. Diamesion: 113x90x368mm

13. The case can place 70pcs 18650 cells;

14. The model for this battery case: Jumbo shark new polly case(DP-6). We have several frame batteries, Hailong-01 case, DA-5C case, SSE-01 Bottle case, DS-6 case and  Hailong-2(HL-2) case, please check carefully before ordering.

15. Different chargers for option;

16. The charging port for the battery is 2.1DC or 2.5DC port;

17. The discharging port for the battery is 5pin blade contacts connector;

18. It has an ON/OFF switch and 4 LED battery capacity indicator.

The assembling and testing for the battery would take a few days, therefore the lead time is about one week,  please be noted.