Bafang M420 G332 primary reduction gear for replacement.

Bafang M420 G332 mid motor nylon gear kit for replacement.

For how to replace the M420 nylon gear, please check the video below:

Bafang M420 motor controller for replacement.

There are two protocols for M420 motors, CAN and UART protocol.  They are not compatible. CAN protocol is with 8 pin male connector for EB-BUS; while UART protocol is with 8 pin female connector for EB-BUS. Please double check before ordering. If you identify the motor protocol from the speed sensor, CAN speed speed sensor has 4 pin connector while UART speed sensor has 3 pin connector. You can also identify the motor protocol from the display connector: Bafang DP C18 display

Please note, If your motor is CAN protocol, the motor needs to be recalibrated after replacing the controller, therefore you need to have a besst tool to complete the final re-calibration. If you don't have the besst tool and the account, your ebike will not work.  For UART motor, replacing the controller no need calibration.

Bafang M600 /M500 torque sensor is CAN protocol; M420 motor torque sensors have two protocols, CAN and UART protocol while UART protocol M420 has standard motor and coaster brake motor which the torque sensors are different, please double check before ordering. You can send us an email if you don't know how to check the motor protocol.

Note: If your motor is a CAN protocol motor, you may need to calibrate the motor after replacing the torque sensor.

Bafang M600 M510 M500 M410 M200 motor eb-bus cable.  The 1T4 cable is one more cable than the 1T3 EB-BUS: the battery communication cable. If you need the counterpart of the battery communication, please email us. The battery COM lead is with the yellow triangle connection.

1T4 harness: display, throttle, light cable and battery communication lead;  If your ebike uses a Bafang battery, then the EB-BUS cable for your bike will have battery communication leads, then you need to choose 1T4 EB-BUS cable.

1T3 harness: display, throttle and light leads; If your ebike does not use a Bafang battery, then 1T3 cable would be suitable for your motor.

1T3 harness: display, light lead and battery communication, this is mostly for M510 FC2.0 motor.

1T2 harness: display and light leads. If you don't have throttle for your bike, this one would be suitable for you. This cable is mostly for M510 too.

1T1 EB-BUS cable: only for display, if you don't use throttle and bike light, then you can choose this cable

Bafang M410 nylon gear for replacement

Original Bafang M600 M510 M560 M630 M820 M620(CANbus), M400(CANbus), M410 motor display extension cable. 

This cable is suitable for all the Bafang CAN-bus display. 

Cable length: 200mm.

Bafang M410 controller 36V 48V 250W for replacement.

You need to calibrate the motor with Bafang Besst tool after replacing the Bafang M410 controller, please note.

Bafang M600 M500 M510 M420 Mid motor axle rubber seal

Bafang M620 M600 M510 M500 M420 crank arm bolt/ screw;

Bafang M600 /M500 /M510 M410 M200 M820 speed sensor adapter cable, 1T1 cable is only for connecting the speed sensor; 1T2 cable for connecting speed sensor and light; 1T3 cable for connecting speed sensor, light and shift sensor; If you want to connect the shift sensor, please order the shift sensor separately.

Cable length:

1T1 cable: 15cm

1T2 cable: 20cm

1T3 cable: 30cm

Bafang M420 motor nylon gear cover/ motor core cover:

Cover A is for motor core; Cover B is for nylon gear.

Bafang M420 motor sealing gasket

Bafang M410 torsion sensor for replacement/ Bafang G333 torque sensor for replacement.

Bafang M620 G510 M600 M500 M420 chainwheel lock nut wrench/spanner

Bafang Original M600 M500 M510 M820 M410 M200 Speed sensor; there are two types speed sensor, one is with black connector which can plug directly to the motor; the other one is with blue connector and you need to use an adapter cable to connecting the speed sensor to the motor(the adapter cable can have headlight leads or shift sensor leads, if you want to connect a shift sensor and a head light for your bike, you can choose the speed sensor with blue connector and order the adapter cable separately on our website)

Speed sensor with blue connector has two types cable lengths: 40cm and 10cm, we normally ship by random, if you need specific cable length, please send us an email after placing the order.

The speed sensor with black connector is with about 30cm cable length.

Bafang M600 M510 M500 M420 mid drive crank arms,left and right, 170mm;

Crank arm bolts are included.

Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Bafang Ultra G510 M620 speed sensor;

Bafang M400 MAX drive G330 motor speed sensor;

Bafang Modest drive M300 G360 speed sensor.

Bafang M420 speed sensor.

Important: There are two types speed sensors, you can identify them by the connector, 4 pins connector is for CAN motors, and 3 pins connectors is for UART motors, please check your original speed sensor's connector before ordering. You can also check our pictures on the website for the connectors.