Bafang M300 G360 mid motor, 36V 350W/250W CANbus/ UART protocol; it's the barebone motor without accessories. You can replace your current motor directly if the protocol is the same. There are two types of M300 motors, CAN protocol and UART protocol; they are not compatible, please double check your motor before orders.

If you don't know how to identify the protocol of your motor, just check the 8 pin EB-BUS cable connector, for UART protocol, the 8 pins connector from the motor is the female connector; if you check from the display, the UART motor's display is with round connector while the CAN protocol motor is with triangle connector.

Bafang M200 /MM G210 controller 36V 250W CANbus for replacement.

You need to calibrate the motor with Bafang Besst tool after replacing the Bafang M200 controller, please note.

Bafang M200 /MM G210 torsion sensor

Bafang M300 /G360 PAS circuit; Bafang M300 /G360 mid motor pedal assisting sensor PCB;

Original Bafang M600 M510 M560 M630 M820 M620(CANbus), M400(CANbus), M410 motor display extension cable. 

This cable is suitable for all the Bafang CAN-bus display. 

Cable length: 200mm.

Bafang M600 M510 M500 M410 M200 motor eb-bus cable.  The 1T4 cable is one more cable than the 1T3 EB-BUS: the battery communication cable. If you need the counterpart of the battery communication, please email us. The battery COM lead is with the yellow triangle connection.

1T4 harness: display, throttle, light cable and battery communication lead;  If your ebike uses a Bafang battery, then the EB-BUS cable for your bike will have battery communication leads, then you need to choose 1T4 EB-BUS cable.

1T3 harness: display, throttle and light leads; If your ebike does not use a Bafang battery, then 1T3 cable would be suitable for your motor.

1T3 harness: display, light lead and battery communication, this is mostly for M510 FC2.0 motor.

1T2 harness: display and light leads. If you don't have throttle for your bike, this one would be suitable for you. This cable is mostly for M510 too.

1T1 EB-BUS cable: only for display, if you don't use throttle and bike light, then you can choose this cable

Bafang M600 /M500 /M510 M410 M200 M820 speed sensor adapter cable, 1T1 cable is only for connecting the speed sensor; 1T2 cable for connecting speed sensor and light; 1T3 cable for connecting speed sensor, light and shift sensor; If you want to connect the shift sensor, please order the shift sensor separately.

Cable length:

1T1 cable: 15cm

1T2 cable: 20cm

1T3 cable: 30cm

Bafang M300 G360 mid motor plastic gear for replacement.

For how to replace the Bafang M300 nylon gear, please check video below:

Bafang M300 G360 motor plastic cover for replacement

Bafang M300 G360 mid motor PAS magnet disc for replacement

Bafang M300 G360 mid motor main steel gear with cover for replacement

Bafang Original M600 M500 M510 M820 M410 M200 Speed sensor; there are two types speed sensor, one is with black connector which can plug directly to the motor; the other one is with blue connector and you need to use an adapter cable to connecting the speed sensor to the motor(the adapter cable can have headlight leads or shift sensor leads, if you want to connect a shift sensor and a head light for your bike, you can choose the speed sensor with blue connector and order the adapter cable separately on our website)

Speed sensor with blue connector has two types cable lengths: 40cm and 10cm, we normally ship by random, if you need specific cable length, please send us an email after placing the order.

The speed sensor with black connector is with about 30cm cable length.

Bafang M200 /G210 mid motor plastic gear for replacement.

The dimension for the nylon gear is 123mm; the thickness of the nylon gear is 23mm. There are 76 teeth for M200 plastic gear.

For how to replace Bafang M200 nylon gear, please refer to the below video:

Bafang M300 /G360 mid motor controller 36V 250W for replacement(UART protocol).

There are two types protocols for Bafang motors, UART and CAN. The controllers for the two protocols are not compatible. Please check your motor protocol first. If you don't know how to check the protocol for the ebike, you can check the display connector, UART system's display is with round female connector while CAN system's display is with triangle male connector. You can refer to this Bafang display to check the picture of the different connectors: Bafang DP C07 display

We have both CAN and UART controllers in stock; please note, replacing CAN controller, the motor needs calibration with Bafang Besst tool, otherwise the motor will not work properly; replacing UART controller, the motor does not need calibration. If you don't have the Besst tool to calibrate the motor, please don't order the CAN controller.

Bafang M300 /G360 Pawl freewheel

For How to replace the M300 pawl clutch, please check the video below:

Bafang shift sensor for MAX drive M400 G330, modest drive M300 G360, Bafang M420, Ultra M620 G510 mid motor.

Bafang Ultra G510 M620 speed sensor;

Bafang M400 MAX drive G330 motor speed sensor;

Bafang Modest drive M300 G360 speed sensor.

Bafang M420 speed sensor.

Important: There are two types speed sensors, you can identify them by the connector, 4 pins connector is for CAN motors, and 3 pins connectors is for UART motors, please check your original speed sensor's connector before ordering. You can also check our pictures on the website for the connectors.

Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Bafang M300, M400, M620, G330, G360, G510 UART EB-BUS cable.

Bafang Max drive cable, main harness 1T3, connecting the display, a pair of e-brakes, cable length: 1.2m;

Bafang Max drive cable, main harness 1T2, connecting the display and one brake, cable length: 1.2m;

Bafang Max drive cable, main harness 1T1, connecting the display, for coaster brake system, cable length: 1.5m

If your original Max drive unit is with 1T1 EB-BUS and you want to add a throttle function for your ebike, please choose the 1T4 EB-BUS. The throttle function only works after starting with pedaling the ebike, please note.  

If your original Max drive unit is with 1T3 EB-BUS and you want to add a throttle function for your ebike, please choose the 1T4 EB-bus. The throttle function only works after starting with pedaling the ebike, please note.  Important tips: the throttle for the Bafang M400 motor only works under load with the pedal speed reaching 10km/h.

The display connector is with 5 pin round connector which means for UART protocol, not for CAN protocol, please note.

Bafang MAX drive m400 G330 chainwheel- 38T;

Bafang M300 M200 motor share the same MTB chainwheel with M400 motor.

E-bike 6V LED headlight suitable for Bafang BBS. Input: AC6V ; Cable length: 1.5M

Connector matching for Bafang BBS01/BBS02B controller's headlight plug, red wire for positive, blue wire for negative.

DPC18 display has a "headlight" button; for 965 and 961 display, press "+" button and hold for 3 seconds, the headlight will switch on/off.

If you use it for Ultra M620 mid motor, Bafang M400 motor, M420 or Bafang M300 motor, this 6V LED headlight will also be suitable for these mid drive motors. Please make sure you have the Bafang motor light connection cable.

Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike. 

If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket. 

The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light.  The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.

If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.

If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.

If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.

DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.

CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.

The display has 5 level assisting and 6km walk assisting.

The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.

The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.

The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).

The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual

SW102 mini LCD display for Bafang motors. This LCD is suitable for any Bafang motor with UART protocol(the round 5pin display connector), such as BBS01, BBS02, BBSHD, Ultra G510, Max drive M400, M420 etc.

1.3" OLED screen, waterproofed and small current consumption. 

If you need uers' manual, please click here: Bafang SW102 LCD display uers' manual