Bafang M300 G360 mid motor main steel gear with cover for replacement

Bafang Original M600 M500 M510 M820 M410 M200 Speed sensor; there are two types speed sensor, one is with black connector which can plug directly to the motor; the other one is with blue connector and you need to use an adapter cable to connecting the speed sensor to the motor(the adapter cable can have headlight leads or shift sensor leads, if you want to connect a shift sensor and a head light for your bike, you can choose the speed sensor with blue connector and order the adapter cable separately on our website)

Speed sensor with blue connector has two types cable lengths: 40cm and 10cm, we normally ship by random, if you need specific cable length, please send us an email after placing the order.

The speed sensor with black connector is with about 30cm cable length.

Bafang M200 /G210 mid motor plastic gear for replacement.

The dimension for the nylon gear is 123mm; the thickness of the nylon gear is 23mm. There are 76 teeth for M200 plastic gear.

For how to replace Bafang M200 nylon gear, please refer to the below video:

Bafang M300 /G360 mid motor controller 36V 250W for replacement(UART protocol).

There are two types protocols for Bafang motors, UART and CAN. The controllers for the two protocols are not compatible. Please check your motor protocol first. If you don't know how to check the protocol for the ebike, you can check the display connector, UART system's display is with round female connector while CAN system's display is with triangle male connector. You can refer to this Bafang display to check the picture of the different connectors: Bafang DP C07 display

We have both CAN and UART controllers in stock; please note, replacing CAN controller, the motor needs calibration with Bafang Besst tool, otherwise the motor will not work properly; replacing UART controller, the motor does not need calibration. If you don't have the Besst tool to calibrate the motor, please don't order the CAN controller.

Bafang M300 /G360 Pawl freewheel

For How to replace the M300 pawl clutch, please check the video below:

Bafang shift sensor for MAX drive M400 G330, modest drive M300 G360, Bafang M420, Ultra M620 G510 mid motor.

Bafang Ultra G510 M620 speed sensor;

Bafang M400 MAX drive G330 motor speed sensor;

Bafang Modest drive M300 G360 speed sensor.

Bafang M420 speed sensor.

Important: There are two types speed sensors, you can identify them by the connector, 4 pins connector is for CAN motors, and 3 pins connectors is for UART motors, please check your original speed sensor's connector before ordering. You can also check our pictures on the website for the connectors.

Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Bafang M300, M400, M620, G330, G360, G510 UART EB-BUS cable.

Bafang Max drive cable, main harness 1T3, connecting the display, a pair of e-brakes, cable length: 1.2m;

Bafang Max drive cable, main harness 1T2, connecting the display and one brake, cable length: 1.2m;

Bafang Max drive cable, main harness 1T1, connecting the display, for coaster brake system, cable length: 1.5m

If your original Max drive unit is with 1T1 EB-BUS and you want to add a throttle function for your ebike, please choose the 1T4 EB-BUS. The throttle function only works after starting with pedaling the ebike, please note.  

If your original Max drive unit is with 1T3 EB-BUS and you want to add a throttle function for your ebike, please choose the 1T4 EB-bus. The throttle function only works after starting with pedaling the ebike, please note.  Important tips: the throttle for the Bafang M400 motor only works under load with the pedal speed reaching 10km/h.

The display connector is with 5 pin round connector which means for UART protocol, not for CAN protocol, please note.