120W alloy shell charger for LiFePO4, Li-ion and lead acid battery, 12V6A, 24V3A, 36V2.5A, 48V2A

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

If you need customized voltage for your battery, please email us.

240W battery charger for lifepo4, li-ion and lead acid battery, suitable for 12V, 24V, 36V, 48V etc. Input voltage 90Volts~240Volts, can be used in any country in the world.

We also provide customized charging voltage, please email us if you need special charging voltage for the charger.

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage;

The default connection for the XLR connector is 1 +, 2-, 3 empty.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).

36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

36v lithium downtube battery charger 180W 42V 4A Alloy shell charger with DC connector.

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Charging connector: 2.5DC connector(default); there are two DC connectors, 2.5DC and 2.1DC; if you are not sure your charging port is 2.1DC or 2.5DC port, please add an extra 2.1DC cable for backup, once the default 2.5DC connector is not suitable for your charging port, you can change to 2.1DC connector;

54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

3-pin charging cable and charging port forJumboshark/Supershark casing battery. There are similar 3 pin charging port in the market, please make sure your battery key has the "Reention" logo, other brand 3 pin charging port would not fit. 

This charging carble and connectors are only suitable for Jumbo shark or Super shark casing batteries, Dorado batteries or other Reention casing batteries, please note.

Please make sure the pins are matching when you try to replace this charging cable to your old charging cable.

This charging cable enables your battery can be charged with larger current.

The cable length is 100cm.

Please check the below video for how to replace the charging cable from the inside of the charger:

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;