Ebike battery
-
e-bike BMS/PCM for 36V or 48V downtube battery (Hailong-1 casing battery)
E-bike BMS for downtube battery. This PCM has no ON/OFF switch, if your battery has ON/OFF switch, then this BMS is not suitable for your battery. This BMS is used for our down tube battery(hailong -1 casing), please click the above link for the battery case to ensure you wouldn't order the wrong bms before making the order. If your PCM is defective, you can buy this one for replacement. THe BMS is for 36V or 48V li-ion ebike batteries, Harness is included with the BMS.
The model for the BMS is: PCM-L13S15-B14 or PCM-L13S15-B14(A-2); please see below video for the bms connection.
-
BMS or battery level LED board for ebike bottle batteries
PCM for ebike bottle batteries, round shape batteries, 24V or 36V lithium batteries.
For bottle batery BMS connection diagram, we will send you by email.
-
48V 13S 20A battery bms with mini size for Jumbo shark/hailong/tigershark/Dorado batteries
48V 13S 20A battery BMS with small size(65*35*10MM) for ebike downtube batteries, Hailong batteries, Jumbo shark batteries or Dorado batteries.
Note, this BMS is only suitable for 48V/13S li-ion battery; it is not suitable for LiFePO4 battery.
The continuous discharge current is 20A, pulse/max discharging current is 50A; The max charging current is 5A.
If you use this BMS for Dorado battery, please short circuit the switch wires.
If you are looking for larger current BMS,you can order order this one for you battery: 48V 13S BMS for downtube battery.
-
12S 30A balanced BMS for 36V LiFePO4 Battery
12S BMS for 3.2V Lifepo4 battery pack, continous discharge current being could be 30A, pulse/peak discharge current being 80A, suitable for 12S(36V) LiFePO4, phosphate battery and li-ion battery;
The BMS has 90 degree temperature protection sensor.
-
17S 30A 40A 50A BMS for 60V Li-ion battery pack with Balance LED light
17S 30A 40A 50A BMS /PCM, Battery management system for 60V Li-ion battery, continuous discharge current could be 30A, 40A or 50A, peak/pulse discharge current could be 100A.
Common Port can handle large charging current; separate port would be with smaller charging current(5A~10A, please refer to detail information on our website);
This BMS has LED for balance, you will get to know which cells are in balance status and which cells are not in balance status.