36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.  

36V, 48V, 52V battery charger with two charging voltages, 80% and 100% full charging voltages.

When you don't use the battery for a long time, it's better not to 100% fully charge the battery for storage.   

Full charging voltage for 36V battery: 40V and 42V; Charging current 2.5A;

Full charging voltage for 48V battery: 51V and 54.6V; Charging current 2A;

Full charging voltage for 52V battery: 55V and 58.8V; Charging current 2A;

This charger has no fuse because the fuse has been changed to the switch(switching between the two charging voltages).

The shortage for a charger without a fuse is the charger will be burned if you connect the charger reversing the positive and negative. 

The charger is with wide AC input voltage 110V -240V.

Juiced bike battery charger, plastic housing charging is hot when charging, and alloy casing charger is better in cooling when charging. Our charger is alloy charger.

If you want charging fast, you can choose larger charging current.

The full charge voltage for the battery is 58.8V, therefore the charging voltage is 58.8V for the 52V battery.

Electric bike company EBC battery charger for replacement

The charger is with US standard socket as default, if you need the charger with other AC input socket, please email us.

Suitable for 

Model A

Model C + conversion cable

Model E

Model F

Model M + conversion cable

Model R 

Model S + conversion cable

Model Y + conversion cable

1500W Alluminum alloy shell charger for e-motorcycle, sightseeing bus,  tourism bus, electric car or ev batery. We can set customized charging voltage and charging current for the battery charger. 12V80A, 24V40A, 36V30A, 48V25A, 60V20A, 72V15A, 84V10A, 96V10A etc.

There are LED indicators for charging and chared status.

Alluminum alloy shell and cooling fan enable the charger will not too be hot when charging.

The handle bar makes the charger to be carried easily.

If you don't know what voltage is your charger, please email us and we will calculate the charging voltage for you.

900W battery charger for petrol car, golf car, electric car, seesighting car, electric motor cycle batteries. Charging voltage and current are as follows: 12V40A, 24V25A, 36V18A, 48V15A, 60V12A, 72V10A; customized charging voltage is available, please email us if you have need special charging voltage for the battery charger;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

1200W 12V 50A (14.6V, 12.6V or 16.8V)charger for lithium ion battery, LiFePO4 battery or Lead acid battery. Fast charging, easity to carry; over-current protection, over-charging protection, shortcircuit protection and reverse connect protection are available for the charger. Smart charger with three charging mode: CC, CV and 
trickle charging. Charging current and voltage can be read by the LED on the charger.

Alloy shell charger 1200W for lithium ion, LiFePO4 or Lead acid batteries. Charging voltage and current are as follows: 12V50A, 24V30A, 36V25A, 48V20A, 60V15A, 72V12A; The charger will stop charger after fully the battery charged.  The charger has an LED display and you can view charging voltage and charging current when charging.