Ebike charger for 36V, 48V, 52V batteries with3 pins mini XLR connectorfor Reention casing batteries.

The full charge voltage for 36V 10S li-ion battery is 42V;

The full charge voltage for 48V 13S li-ion battery is 54.6V;

The full charge voltage for 52V 14S  li-ion battery is 58.8V;

For the charging connector, pin 1 for positive, pin 2 for negative, pin 3 is empty, this is the default connection; if your battery has a different connection, please send us an email after placing the charger.

For the charging current, each battery would have a maximum charging current, normally the default max charging current for the batteries would be 5A; if you want higher charging current, please contact your battery supplier to check what is the max charging amps of your battery first.

ebike battery charger with small 3 pins connector/mini XLR connector suitable for Quietkat ebike battery, GOTRAX CTI 2, Fucare Taurus ebike batteries, Ariel Rider X-Class 60V battery, Otida ebike batteries etc.

The full charge voltage for 36V li-ion battery is 42V;

The full charge voltage for 48V li-ion battery is 54.6V;

The full charge voltage for 52V li-ion battery is 58.8V;

The full charge voltage for 60V(17S) li-ion battery is 71.4V.

Charging current: 2Amps, 2.5Amps, 3Amps, 4 Amps or 5Amps for option. The larger current it is, the faster your battery can be fully charged. Alloy charger is better in heat dissipation compared to Plastic charger.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).

36v lithium downtube battery charger 180W 42V 4A Alloy shell charger with DC connector.

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Charging connector: 2.5DC connector(default); there are two DC connectors, 2.5DC and 2.1DC; if you are not sure your charging port is 2.1DC or 2.5DC port, please add an extra 2.1DC cable for backup, once the default 2.5DC connector is not suitable for your charging port, you can change to 2.1DC connector;

54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;

42V2.5A silent charger for 36v lithium ion battery. This charger is with alloy shell and cooling fan, but it has no noise. It is new designed charger for silent charging. If your battery is 36V Li-ion battery, then this charger is suitable for you. 

Charging connector: DC connector, which is suitable for 36V Hailong-01 casing battery, tigershark 36V battery（DS-6）, 36v bottle battery, new polly 36V battery, and frame DA-5C battery.

The leadtime for the charger is about a week, please note.

36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.