Bafang RM G062 48V 750w / 1000W hub motor,  it is an upgraded version for  RM G060 fat-bike motor.

This high torque motor, max torque to be 85Nm, can be used for eFat or Electric cargo bikes which enable you electric snow-bike or e-cargo bike to run effectively. 

9pin split motor cables; cable length: 1m.

Bafang has two types connectors for this motor. One is with red connector and the other is with the black connector.

The Bafang RM G062 motor has two dropout/forksize, 175mm and 190mm.

There are two types of connector for the Bafang RM G062 motor, the old version connector is silver and black connector, and the new version connector is red connector. Please double check your original motor type before ordering.

There are two types freewheel for the fatbike motor, threaded freewheel and cassette freewheel type, please double check before ordering. 

Bafang motor for Juicedbike Cross-Current bikes

There is no installation screw set with the motor, please note.

Bafang Fat-bike motor controller 48V 750W 1000W for RM G062.750D, RM G062.1000, FM G062.750D, FM G062.1000, G063.750D, G063.1000W motors;

this controller only works with  Bafang UART display, it also needs to work with the Bafang EB-BUS cable.

There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery).  We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.

The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.  

If your motor model is RM G062/FM G062, please double check the motor connector because this model motor has two types of connectors, the old version connector is black and silver connector, the new version motor connector is with red connector. If your RM G062 motor is with black and silver connector, please order the controller from here: Bafang RM G062 controller with old black and silver connector

Bafang controller:48V 36V 500W/350W for bafang RM G010, RM G020, FM G010, FM G020, swx02 etc hub motors; without the Bafang LCD and EB-BUS, the controller will not work.

Bafang hub motor controller 350W 500W 48V /36V(Z910 connector), need to work with Bafang eb-bus cable and bafang display.

There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery).  We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.

The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.  

Bafang RM G062.1000, RM G062.750D, FM G062.750D, FM G062.1000 controller for fatbike/snow bike motor;

this controller only works with  Bafang UART display, it also needs to work with the Bafang EB-BUS cable.

There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery).  We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.

The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.  

Important: There are two verions for G062 motor connector, the old version is silver and black connector; the new version G062 motor is with red connector, we have controllers for both types, please double check before ordering. If your Bafang fatbike motor is with red connector, please check controller here: Bafang RM G062 controller