Bafang M620 /M400
-
Bafang Ultra G510 /M620 chain wheel /chainring 36T/40T /42T /44T /46T /48T
Bafang Ultra M620 /G510 chainrings.
There are two types of Ultra M620 chainwheels: MTB chainring and Fatbike /snowbike chainring. The offsets for the two chain wheels are different.
-
Bafang Ultra M620 G510 motor calibration(UART) display C961
Replacing the Bafang M620 UART controller, the motor may work abnormally(vibration, reverse running etc), you may need to calibrate the motor.
This LCD with special firmware, can be used for calibrating the M620 UART motor after replacing the controller.
This LCD can also work as a standard Bafang LCD display for the Bafang UART motors, please note. It is only used for UART motor calibration. It cannot work for CAN motors too.
For how to calibrate the M620 motor after replacing the controller, please check the pictures on the website or download from here: Bafang M620 UART motor calibration manuel
The calibration LCD is only for the controller version code number being "CR R10M.1000.SN.U 1.5". You can check the controller version number on the controller.
For how to calibrate the motor, you can view the video below:
-
Bafang Ultra M620 G510 Motor primary steel gear for replacement
Bafang Ultra gear, the primary steel gear for Bafang Ultra M620 for replacement.
How to replace the Bafang M620 primary gear, please check below video:
-
Bafang M400 /G330 /G350 /AEG Bafang ratchet/ Pawl Clutch
Bafang g330 ratchet/ Bafang M400 pawl clutch for replacement; If your bafang M400 is not smooth when pedaling, then consider the ratchet is defective.
This pawl clutch is also suitable for AEG MM G350 motor.
How to replace the Bafang M400 G330 pawl clutch, please check the video below:
-
Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400
DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.
CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.
The display has 5 level assisting and 6km walk assisting.
The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.
The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.
The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).
The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual
What are the differences for the Bafang 1-5 PAS DP C18 and 1-9 PAS DP c18 display? Please check the below video:
-
Bafang Ultra M620 G510 motor rotor
Bafang Ultra M620 G510 motor rotor with detecting sensor for replacement. The motor needs calibration after replacing the rotor, UART motor use our special 961 display for the calibartion and CANbus M620 motor needs Bafang Besst tool for calibration.
The two rotors are the same with sizes; only the teeth are different; The matching third gear for the rotor also changed in 2023; If your motor was sourced before 2023, then your motor would be with the old version rotor and the 3rd steel gear; if your motor was sourced this year, please check before ordering or buy the rotor and the 3rd gear together.
How to take out the M620 rotor for replacement, please check below video(We will provide the tool for removeing the M620 rotor freely.):
-
Bafang DP C07 display /C966 LCD HMI
Bafang DP C07( also called C966) display for Bafang G330, M400, M300, M200, BBS serial motors.
There are CANbus and UART protocols for the two displays, how to identify UART or CANbus? If your motor is CANbus, then your display must be CANbus, If your motor is UART motor, then your display is also UART protocol; another method is to check the display connector, CANbus display is with triangle male connector while UART display is with round 5 pin female connector. You can check our picture.
UART display, please set the wheel size and speed yourself.
The C966/DP C07 display has automatically backlight which would be more convemience during night riding.
For UART display, please write down the speed and wheel size you need, we will set them before shipping.
CANbus display cannot set the speed and wheel size because the speed and wheel size are determined by the motor controller.
-
Bafang Ultra G510 motor torque sensor / Bafang Ultra M620 axle
Bafang Ultra M620 G510 motor torque sensor /torsion sensor for replacement;
Bafang Ultra M620 torque sensor with axle for repair. There are two types of M620 torque sensor, CAN protocol and UART protocol, please check your motor protocol before ordering. The CAN protocol motor needs re-calibration by the Besst tool after replacing the torque sensor or controller, please note. If you don't have Besst too access, please don't order the CAN torque sensor.
If you don't know how to check your M620 motor protocol, please check from the display's connector: DP C18 display
How how to replace the M620 torque sensor, please check the video below:
-
Bafang Ultra M620 G510 motor core gasket
Bafang Ultra M620 G510 motor core gasket -
Bafang Ultra M620 /G510 motor gasket for controller
Bafang mid motor gasket for Ultra M620/ G510 motor.
