Bafang BBS power cable for extension or conversion.

The connector can be BBS01/02 default bullet connector, BBSHD Anderson connector, Amass XT60 connector, Amass XT90 connector.

Cable length could be 10-100cm for your demand;

Wre: 12AWG black/red wire;

If your current Bafang motor and the battery are with different connector, then you may need a conversion cable.

If your ebike battery power cable is too short, then you may need a extension cable. 

Hailong case discharging connector 4 blade contacts, 5 round contacts or 6 round contacts, fit for Hailong 01, Hailong 02 or Hailong 03 casing battery.  Please note They are not suitable for Hailong 01 Pro battery; the hailong 01 Pro case use 5 blade contacts connector al though the housing is similar but not compatible.

There are 3 types of connectors for Hailong case, the outter dimensions are the same, only the contacts are different, one is with 4 blade contacts, one is with 5 golden round contacts and the rest is with 6 round coontacts. Please check your own Hailong connectors before placing the order.

20A< 4 pin connector<25A; 25A <5 pin connector <30A; 

 30A < 6 pin connector <35A;

Juiced G1 or G2 battery connector with cable for replacement;

Suitable for following Juicedbike:

CampScrambler

CityScrambler

CrossCurrent S2

CrossCurrent X

HyperFat 1100

HyperScrambler

HyperScrambler 2

HyperScorpion

RipCurrent

CrossCurrent X Step-Through

HyperScorpion Express

RipCurrent S 

RipCurrent S Step-Through

RipRacer

Scorpion X

4/5 pins connector for e-bike lithium ion battery, for rear rack casing, downtube silver fish casing. There may be different connectors for rear rack or filverfish casing battery, please check the dimension of the original connector before ordering.

E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.

electric bike motor phase connector green bullet connector male/famale with isolated cover;

Ebike brushless controlle power connector bullet type male/female with housing;

Bullet connector 4.0mm/4.2mm for battery/motor phase/controller power connection.

The price includes male and female bullet connector, amle and female isolated protector.

This connector is suitable for Tongsheng TSDZ2 mid motor power plug.

e-bike motor hall connector DJ7061A-2.8-11/21 male/female plug; this plug is normally used for motor hall, ebike brake, e bike gas/throttle end connection.

6P plug for motor hall;

3P plug for e-bike throttle/gas;

2P plug for e-brake;

Plug sping and male tab are included.

ebike Atlas frame battery mouting foot.

This mounting is suitable for our downtube Atlas casing battery(DA-5C).

The price is only for the mouting, not including the battery case.

We will solder the power connector before shipment if you also add the power connector with the frame battery attachment.

The default discharging connector of the mountin is 2P original plug, please note. If you need 6P plug for larger current, please email us after placing the order.

Ebike battery key lock for Super73 fuel tank battery or Lectric XPedition, XPremium or XP Trike2 battery. 

If you have multiple Super73 bikes or Lectric bikes, how to use one key for all of your batteries? Just replace the battery key lock with the same key number which we can offer. 

Please refer to the following video for how to replace the battery key lock: