Bafang BBS01, BBS02, BBS01B, BBS02B motor core for replacement, motor stator and rotor are included.

The BBS bullet connectors are included.

The motor core gasket is included.

The 3 phase wire rubber seals are included.

Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike. 

If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket. 

The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light.  The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.

If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.

If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.

If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.

BBS hall gomet sealing;

BBS01/BBS02 hall sensor wire rubber gasket;

BBSHD hall wire rubber seal;

When you open the motor to replace the motor stator, or HD rotor, you may ruin the hall sensor wire gomet, therefore you may need a new wire ruber seal for the bbs.  

BBS01, BB0S2 and BBSHD use the same hall wire rubber seal.

Bafang BBS BB alloy spacer;

Inner diameter: 35mm

Outer diameter: 42mm

Thickness: 1mm, 1.5mm, 2mm, 2.5mm, 3mm etc

SW102 mini LCD display for Bafang motors. This LCD is suitable for any Bafang motor with UART protocol(the round 5pin display connector), such as BBS01, BBS02, BBSHD, Ultra G510, Max drive M400, M420 etc.

1.3" OLED screen, waterproofed and small current consumption. 

If you need uers' manual, please click here: Bafang SW102 LCD display uers' manual 

8FUN/Bafang BBS01B/BBS02B core, stator or rotor for replacement. The bbs core includes a stator and a rotor. The price is only for stator, if you need the complate core, please add the rotor when placing the order. If you need BBSHD stator/windings, please order separately.

Bafang BBSHD rotor for replace.

Bafang recently upgraded BBSHD rotors and stator. The new version rotor is more durable, but it is not compatible with old version stator housing. Bafang recommends to replace the motor core(rotor+stator) if your old version is broken and nowhere to find the old version rotor. If you also need the BBSHD stator, please order on our website.

Bafang no longer stock old version rotor; the bbshd rotor we have currently is new version; if your rotor is old version, we recommend you to add the stator as well.

How to identify your rotor is old version or new version, please refer to the picture illustration on our website. 

If your BBSHD motor is ordered before April, 2019, then it would be with the old version BBSHD rotor because Bafang upgraded the rotor in April 2019.

BBSHD controller  52V 28A or 48V 30A (the latest version); Bafang has upgraded the BBSHD motor; The 52V BBSHD controller cannot work for 48V HD motor now.  Please double check your system before ordering.

It has connection for gear sensor and 6V headlight. If you need a 6V headlight, please order on our website. 

BBSHD controller rubber seal is included with the controller.

BBSHD 48V 30A controller code: C571-30-501

BBSHD 52V 28A controller code: C571-30-506

Bafang BBSHD kit chain wheel 40T, 42T, 44T or 46T