Thumb throttle/accelerator for Bafang central driven motor kit bbs01, bbs02,  BBSHD, Ultra G510 M620, Max drive M400, M420, M500, M600 or M800 mid motors.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.

Bafang Ultra M620/ G510 mounting bolts /nuts /washers, including chain wheel lock nut and the other bolts as shown in the picture.

If you need a special spanner for the chainwheel lock nut, please check from here: Bafang M620 chainwheel lock nut wrench 

Bafang DP C07( also called C966) display for Bafang Max drive M400, M300, BBS serial motors.  

Bafang DP C10 display Bafang M400, M300, M420 etc motors.

There are CANbus and UART protocols for the two displays, how to identify UART or CANbus? If your motor is CANbus, then your display must be CANbus, If your motor is UART motor, then your display is also UART protocol; another method is to check the display connector, CANbus display is with triangle connector while UART display is with round 5 pin female connector. You can check our picture.

UART display, please set the wheel size and speed yourself.

The C966 display has automatically backlight which would be more convemience during night riding.

Bafang bbs01, bbs02 or BBSHD LCD C961 or C965. The displays are with 5pin round connector.

If you need the manuals or specifications for the display, please click here: C965 users' manual or C961 users' manual

Bafang BBS01/BBS02/BBSHD C965/C961/C963 LCD extension cable. Cable length: 50cm.

This LCD extension cable is also suitable for Ultra M620, Max drive M400 mid motor LCD which has the round 5pin LCD connector.  

Bafang Ultra G510 motor hanger; Original Bafang Ultra M620 mounting cradle.

Bafang M600 /M500 /M510 alloy hanger. M600, M510 and M500 shares the same hanger; There are two types hangers for M600/ M510/ M500 motors, please double check before ordering.

Bafang Ultra motor plastic cover / Bafang Ultra M620 plastic cover for replacement.

Bafang mid crank kit bbs01 and bbs02 brake grip. 

This e-brake fits for all the Bafang motors with round Higo connector.

Bafang max drive clutch/ Bafang M400 finger freewheel for replacement; If your M400 MAX Drive is not smooth when pedaling, then consider the pawl clutch is defective.

How to replace the Bafang Max drive M400 G330 pawl clutch, please check the video below: