48V 35A BMS with small size for Reention Dorado batteries(suitable for 1000W-1800W motors)

48V 35A BMS for Dorado batteries with small size, 72*52*15mm(L*W*T). There are several Dorado cases, this BMS is only suitable for ID-plus, ID-max and ID-21700 case. If you don't know which case your battery uses, you can check the Dorado case picture from here: 48V Dorado battery

The BMS is with higher current which is suitable for BBSHD, BAFANG M620 Ultra motor etc 1000W, 1500W or 1800W motors.

This BMS has no ON/OFF switch, if your need switch for your battery,  please order other BMS on our website.

48V 35A BMS for Dorado batteries with small size.

The BMS is with higher current which is suitable for BBSHD, BAFANG M620 Ultra motor etc 1000W, 1500W or 1800W motors.

1. Charging voltage: DC54.6V (CC/CV);
2. Single cell self-consumption current: ≤100μA;
3. Max continuous charging current: 5A;
4. Max continuous discharging current: 35A;
5. Overcharge detecting voltage: 4.25±0.05V;
6. Overcharge detecting delay time: 0.5S-2S;
7. Overcharge recover voltage: 4.19±0.1V;
8. Overdischarge detecting voltage: 2.8±0.1V;
9. Overdischarge detecting delay time: 50-500mS;
10. Overdischarge recover voltage: 3.0±0.1V;
11. Overcurrent detecting voltage: 105±10A;
12. Overcurrent detecting delay time: 50mS-100mS;
13. Recover: recover by Cutoff load;
14. Short circuit detecting: Shortcircuit externally;
15. Short circuit detecting delay time: 200-800μs;
16. Short circuit recover by by Cutoff load;
17. Internal resistance: ≤20mΩ
18. Working temperature: -40~+70°C;
19. Storage temperautre: -40~+125°C;

Note: Testing result for above based on 25°C; The result may be varied if testing temperature is no 25°C.