Bafang M510 G522 torsion sensor for replacement.

There are two types of Bafang M510 torque sensors, one is for FC1.0 M510 motor and the other is for FC2.0 M510 motor, the torsion sensor model begins with "SR" is for FC1.0 and "GR" torque sensor is for FC2.0 motor. 

Currently our M510 torsion sensors are only for M510 FC1.0 motor, it will not fit for FC2.0 motor, please note.

Note: Replacing the torsion sensor, you will need to calibrate the M510 motor with the Besst tool, otherwise the motor will not work correctly.

If you don't know how to check your motor is FC1.0 or FC2.0, you can check the motor model mark on the motor cage, there will be "FC1.0" or "FC2.0" mark on the motor.

Bafang Max drive M400 /G330 barebone motor.

If your motor is "old age" and defective, you can buy a new barebone motor to replace it.

The default protocol for our barebone M400 motor is UART, please note. 

How to check your max drive G330 motor is UART or CAN protocol? Check the original display connector, UART protocol is with round 5pin connector display which CAN protocol is with 5pin triangle connector display.

If you need complete set of Max drivec M400, please email us.

Bafang M400 G330 motor take apart:

Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Jumbo shark casing battery connecotor: male and female. It has 5 blade contacts for the connector. There are two types of New Polly case connectors, one is with 5 blade contacts and the other is with 4 blade contacts; they are not compatible, please make sure you order the right connectors.

This 5pins connector is stuiable for the Jumbo shark case, if you are not sure it fits your case or not, please check the complete case dimension first.

This connector is suitable for Super73 R, RX and S2 series batteries. If you need a replacement battery for Super73 R, RX or S2, we can also provide it with larger WH.

Hailong case discharging connector 4 blade contacts, 5 round contacts or 6 round contacts, fit for Hailong 01, Hailong 02 or Hailong 03 casing battery.  Please note They are not suitable for Hailong 01 Pro battery; the hailong 01 Pro case use 5 blade contacts connector al though the housing is similar but not compatible.

There are 3 types of connectors for Hailong case, the outter dimensions are the same, only the contacts are different, one is with 4 blade contacts, one is with 5 golden round contacts and the rest is with 6 round coontacts. Please check your own Hailong connectors before placing the order.

20A< 4 pin connector<25A; 25A <5 pin connector <30A; 

 30A < 6 pin connector <35A;

Bafang BBSHD 48V 1000W Pedal assisting Magnet ring disc;

Note: This magnet ring is not suitable for BBS01 or BBS02 kit; it's only suitable for BBSHD kit.

Bafang M400 reduction gear for replacement; the Bafang max drive steel cover is included.

The item includes motor gasket, reduction gear and gear cover/motor casing as shown in the picture.

For how to replace the reduction gear cover, please refer to the following vedio.

BBSHD controller  52V 28A or 48V 30A (the latest version); Bafang has upgraded the BBSHD motor; The 52V BBSHD controller cannot work for 48V HD motor now.  Please double check your system before ordering.

It has connection for gear sensor and 6V headlight. If you need a 6V headlight, please order on our website. 

BBSHD controller rubber seal is included with the controller.

BBSHD 48V 30A controller code: C571-30-501

BBSHD 52V 28A controller code: C571-30-506

Bafang Max drive core, including Bafang M400 stator or rotor for replacement.

Bafang M400 motor core is easy to disassemble and replace.

The Bafang MAX drive M400 G330 motor core are sourced directly from Bafang.

If your motor is CAN protocol, this stator or motor core would not fit for your motor. 

How to check your motor is CAN or UART protocol? Please check from the M400 controller or the Bafang display connector;

The UART protocol controller will have a "U" mark on the controller, it's EB-BUS connector is with female connector and the display for the motor would be UART protocol with a 5 pin round connector.
If the display connector is with triangle connector, then it is with CAN protocol. The back of the display may also mark “CAN".

Replacing the CAN motor core, you may need to recalibrate the motor.

For how to replace the motor core, please check video below:

Reention Dorado battery, EEL battery, tigershark, Atlas battery connector:  2 pins, 5 pins or 6pins. 6P is for larger Amps demand.

These are the original connectors for the tigershark battery or Atlas frame battery, male and female.

This mounting connector is also suitable for other Reention cases, you can check the dimension before placing the order.

2 pins connector male number: "PLA0273",  female part number"PLA0274". Another 2 pins connector male number is PLA0379, and matching female part(with a small PCB on the back) is PLA0378.

6 pins female part number: PLA0239, 6pin male part number: PLA0238; If the part number is the same as your original's then this plug will also fit for your case. 

If you need the power cable soldered with this plug, please order from here: Tigershark/ Atlas/ Dorado power cable with PLA 0273 plug

Bafang Ultra M620 eb-bus 1T4 cable; if your Ultra loom is broken, then this 1T4 harness would be suitable for you to replace.

There two types of Ultra M620 EB-BUS cable, one is with a triangle display connector and other other type is with a round display connector, please check your display connector before ordering the Bafang Ultra harness.

Total cable length is 1.5m.

36V11.6AH~20AH li-ion down tube battery for electric bicycle, 361x90x91mm for Hailong 01 case;  made by Panasonic NCR18650BD, Sanyo NCR18650GA, Samsung INR18650-35E;

The fixing plate is included.

If you need back chargers for this battery, please click here: 120W 42V 2.5A Alloy charger,  

Bafang Max Drive plastic cover for Bafang M400 G330 mid motor.

Bafang hub motor clutches for RM G010, SWXK, SWXH, SWXK5, SWXB, SWXP, SWX01 etc. motors with 36T nylon gears;

For some of the hub motors, Bafang may use the same motor clutches.

The 36T nylon gear is 38mm in diameter, 11mm or 12mm in thickness(they are compatible). We will ship them randomly. If you need specifically 11mm thickness or 12mm thickness nylon gears with the clutch, please email us after placing the order. Please check your original clutch before ordering.

All the clutches are originally sourced from Bafang.

For how to replace Bafang hub motor clutch, please refer to the follow video: