24V11.6AH Li-ion bottle battery for electric bicycle, mounted on the bicycle frame, including charger. Long lifecycle and high performance.

24V lithium ion/lipo battery for electric bicycle, easy mounted and portable; ABS case/Frog case, 120W alloy charger and PCM-7S are included. 

Dual battery converter with wide DC input 24V -72V. 

Output: DC 24V -72V, max 30A or 40A current. 

Input with XT60 male connector; output with XT60 female connector. 

If you have two batteries(24V-72V),  you want to use the two batteries with one ebike, then you can connect the two batteries with the dual battery converter.  

When you are going to charge the battery, please switch one of the batteries first before charging because the dual battery converter only protect the two batteries discharging; it has no protection for simultaneous charging.

1200W 12V 50A (14.6V, 12.6V or 16.8V)charger for lithium ion battery, LiFePO4 battery or Lead acid battery. Fast charging, easity to carry; over-current protection, over-charging protection, shortcircuit protection and reverse connect protection are available for the charger. Smart charger with three charging mode: CC, CV and 
trickle charging. Charging current and voltage can be read by the LED on the charger.

42V2.5A silent charger for 36v lithium ion battery. This charger is with alloy shell and cooling fan, but it has no noise. It is new designed charger for silent charging. If your battery is 36V Li-ion battery, then this charger is suitable for you. 

Charging connector: DC connector, which is suitable for 36V Hailong-01 casing battery, tigershark 36V battery（DS-6）, 36v bottle battery, new polly 36V battery, and frame DA-5C battery.

The leadtime for the charger is about a week, please note.

Alloy shell charger 1200W for lithium ion, LiFePO4 or Lead acid batteries. Charging voltage and current are as follows: 12V50A, 24V30A, 36V25A, 48V20A, 60V15A, 72V12A; The charger will stop charger after fully the battery charged.  The charger has an LED display and you can view charging voltage and charging current when charging. 

900W battery charger for petrol car, golf car, electric car, seesighting car, electric motor cycle batteries. Charging voltage and current are as follows: 12V40A, 24V25A, 36V18A, 48V15A, 60V12A, 72V10A; customized charging voltage is available, please email us if you have need special charging voltage for the battery charger;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

600W alloy shell battery charger for electric motorcycle, golfcar, petrolcar, electric car battery, 12V25A, 24V18A, 36V12A, 48V10A, 60V8A;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

400W alloy charger for electric vehicle, LiFePO4, lithium-ion and lead acid battery; 12V20A, 24V12A, 36V8A, 48V6A, 60V5A

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

120W alloy shell charger for LiFePO4, Li-ion and lead acid battery, 12V6A, 24V3A, 36V2.5A, 48V2A

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

If you need customized voltage for your battery, please email us.

240W battery charger for lifepo4, li-ion and lead acid battery, suitable for 12V, 24V, 36V, 48V etc. Input voltage 90Volts~240Volts, can be used in any country in the world.

We also provide customized charging voltage, please email us if you need special charging voltage for the charger.

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage;

The default connection for the XLR connector is 1 +, 2-, 3 empty.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).