36V14AH -17.5AH ebike battery with frog casing, can be mounted on the bicycle frame; 

36V li-ion rear rack battery. This battery is suitable for Bafang BBS kits. This rack battery does not need special rack to mount it, you can mount it on any rack you have with the fixing plate and bar we provide.

48V Dorado battery for ebike,14AH, 17.5AH, 20AH, 21AH, or 24AH for your choice. If you want a longer mileage, you can choose the max capacity 24AH. If your motor is 1000W-1800W, then our Dorado battery will fit your ebike.

The mounting bases for the Dorado batteries are the same, if the length is the same, then you can choose this battery as a spare battery. There are only two lengths for the Dorado cases, L1=458mm or 390mm, some people would like to measure the longest part of the battery, and get 505mm or 440mm to check which model you need to choose. 

There is a 5V USB output for the Dorado case which you can charge your mobile; 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

For the discharging connector, the default connector is 2pin connector(female PLA0274 and male PLA0273); if your ebike runs larger current, it's better to use 6pin connectors(female PLA 0239 and male PLA 0238); Normally most of the e-bikes for power less than 750W will use 2 pin connectors. If you are confuse for the connectors, please check on our website: Tigershark / Atlas/ Dorado connectors

 If you don't know which charging and discharging connector to choose, please email us.

This battery can be a replacement for Biktrix standard battery, NCM moscow Milano Plus/Venice Plus/Moscow Plus/Aspen Plus/Miami ebike batteries, 

Dorado battery (505L) is suitable for e-bikes which from ECCOBIKE/ ADDMOTOR/ VOLTBIKE/ CIVI/ M2S/ Surface 604 bikes/ Rambo/ Quietkat/ BAKCOU....etc, while 440L Dorado battery fits for the max-cargo and G20-CARGO electric bike.

Aventon Pace 500 replacement battery.If you want a larger WH battery for the Aventon Pace 500, you can order on our website.

48V 14AH Reention EEL battery for ebike. This battery is installed in the bike tube; there are 4 types of these cases with different length and width. Our battery case is with L1*L2 = 430 X 354mm, and with width*height being 64*94mm. Please measure your case's sizes before ordering the battery.  You can also check the picture on our website for the case.

NCM Moscow M3 Magnum Ebike Replacement Battery.

This battery can be the replacement battery for Ride1up Core-5 or Ride1up LMT'D ebike. 

48V17.5AH battery for AddMotor EB 1.0 M-60 P7, M-60 R7, M-66 R7, M-70 or M-360

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

There are two types charging port for AddMotor 1.0 battery, 5.5X2.1DC one pin barrel charging port or mini 3pins XLR charging port, please double check your original charging port and choose the correct charging port if you want to use your original charger for the new battery. 

Plug and play for the new battery for your Addmotor bike. 

48V Dorado battery suitable for Addmotor Motan M-430

The max AH we can build with this battery case is 48V24AH, but some of the bike models might not fit. We will email you to double check if you order the 24AH version battery. The battery can be just plug and play. There are two types charging ports for Addmotor, one pin and 3pins charging ports, please your original battery's charging port and choose the right one, you can use your original charger for the new battery if you select the correct charging port.

Suitable for

Addmotor Motan M-430

Addmotor Motan M-550

Addmotor Motan M-550 P7

Addmotor Motan M-560

Addmotor Motan M-560 P7

Addmotor Motan M-5800

QuietKat Villager /Jeep replacement battery 48V 14AH or 17.5AH; there are two types connector for this battery, 4pins and 6pins, please double check your battery bottom connector before ordering. The larger AH the battery has, the more mileage you can get each charge.

Suitable for:

QuietKat 2020-2023 Jeep Models;

QuieiKat 2020-2023 Villager models;

48V15AH~20AH intube battery fore Rambo bike replacement;

There are several types this model battery cases with different sizes, and they are not interchangeable, therefore, please double check your original battery size.

The charging connector will be the 3 pin charging connector( mini XLR 3 pin connector ) as default; If your prefer different charging port, please contact us after placing the order. 

The battery is compatible for the following ebikes:

Rambo Venom

Rambo The Megatron

Rambo The Prowler

Rambo Bushwacker 2.0 

Rambo Krusander AWD 2.0 

Rambo Pusuit 2.0 & 2.0 Step-Thru

Rambo Rooster 2.0

Rambo The Savage 2.0

RAMBO REBEL 2.0

48V Hailong battery for ebike.

The mounting is included with the battery; Key lock is available to lock the battery on the battery mounting foot.

The battery is with 5 blades pins connector. Hailong Plus is the higher version for the Hailong pro case.

Case size: 368X90X110mm.

There are several Hailong batteries in the market, please check the battery connectors and mounting bases to identify them.

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

Charging port is 5.5X2.1DC or 5.5X2.5DC;

The cases are upgraded version has a ON/OFF switch which is more safe for the battery. The older version case has no switch. If your original battery has no switch but the size and connectors are the same as ours, then our battery can be a substittude.

Charging voltage for the 48V battery is 54.6V; recommend to charge the battery with <5Amps.