Controller
-
$86.00Bafang RM G062/G063 FM G062 /G063 Fat-bike motor controller
Bafang Fat-bike motor controller 48V 750W 1000W for RM G062.750D, RM G062.1000, FM G062.750D, FM G062.1000, G063.750D, G063.1000W motors;
this controller only works with Bafang UART display, it also needs to work with the Bafang EB-BUS cable.
There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery). We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.
The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.
If your motor model is RM G062/FM G062, please double check the motor connector because this model motor has two types of connectors, the old version connector is black and silver connector, the new version motor connector is with red connector. If your RM G062 motor is with black and silver connector, please order the controller from here: Bafang RM G062 controller with old black and silver connector
-
$45.00Bafang 350W/500W 48V/36V hub motor controller
Bafang controller:48V 36V 500W/350W for bafang RM G010, RM G020, FM G010, FM G020, swx02 etc hub motors; without the Bafang LCD and EB-BUS, the controller will not work.
Bafang hub motor controller 350W 500W 48V /36V(Z910 connector), need to work with Bafang eb-bus cable and bafang display.
There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery). We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.
The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.
-
$85.00Bafang RM G062/FM G062 48V 1000W/ 750W controller
Bafang RM G062.1000, RM G062.750D, FM G062.750D, FM G062.1000 controller for fatbike/snow bike motor;
this controller only works with Bafang UART display, it also needs to work with the Bafang EB-BUS cable.
There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery). We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.
The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.
Important: There are two verions for G062 motor connector, the old version is silver and black connector; the new version G062 motor is with red connector, we have controllers for both types, please double check before ordering. If your Bafang fatbike motor is with red connector, please check controller here: Bafang RM G062 controller
-
$85.00Bafang RM G060/FM G060 48V 750W controller
Bafang RM G060.750D, FM G060.750D controller for fatbike/snow bike motor;
This controller only works with Bafang UART display, it also needs to work with the Bafang EB-BUS cable. If you already have Bafang UART display and BBS eb-bus cable, then you can use your own display and cable.
Important, Bafang RM G060/FM G060 motor model has two types of connectors, for motor power less than 500W, the motor connector is with Z910 connector, and for 750W G060 motor, the motor cable with Z916 connector(25MM in diameter plug), please double check before ordering. If you need 350W/500W RM G060/FM G060 controller, please check: Bafang 250W/350W controller
