48V 14AH /48V17.5AH Ebike in-tube battery(SYR case), There are two lengths for this case, the shorter case(cover length-=354.3mm) is for Aventon level replacement battery; The longer case(cover length =429.1mm) is for other intube ebike battery, such as Quietkat 2020-23 Ranger, Quietkat 2020-22 Warrior, Quietkat 2021-23 Ranger 5.0, Quietkat 2021-23 Pioneer, Markhor frame intube battery.

If you are looking for Aventon level replacement battery, only the shorter case will fit and the shorter can can max build 48V14Ah battery, please note.

There are several similar cases with different sizes, please double check before ordering. If your case sizes are the same as ours, please double check the discharging connector because with the same sizes, there are two types of connectors, 4 pins connector and 6 pins connector, they are not compatible. Please check our pictures for details.  If you are confused, please email us, send us some pictures of your current battery and we will check for you.

If you are not sure about which case is suitable for your battery, please contact us.

If you are looking for 52V17.5AH with the longer case, we can also build it, please email us if you need.

48V Hailong G70 battery for ebike.

 The mounting is included with the battery; Key lock is available to lock the battery on the battery mounting foot.

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

Charging port is 5.5X2.1DC or 5.5X2.5DC

Charging voltage for the 48V battery is 54.6V; recommend to charge the battery with <5Amps.

48V 14AH Reention EEL battery for ebike. This battery is installed in the bike tube; there are 4 types of these cases with different length and width. Our battery case is with L1*L2 = 430 X 354mm, and with width*height being 64*94mm. Please measure your case's sizes before ordering the battery.  You can also check the picture on our website for the case.

NCM Moscow M3 Magnum Ebike Replacement Battery.

This battery can be the replacement battery for Ride1up Core-5 or Ride1up LMT'D ebike. 

48V 17.5AH intube battery for Dengfu Carbon fibre ebike frame.

The charging port is 5.5X2.1DC as default..

The battery itself has no ON/OFF switch. The original Dengfu frame(E10/ E22/ E23) has an ON/OFF switch and a charging port on the frame. Therefore if you are looking for the battery for the original Dengfu frame, this one can be plug and play.

Important: If your existing Dengfu frame has no ON/OFF switch and charging port on the frame, please advise us and will modify the connection of the battery socket specially. 

Juiced Bike battery 52V15.6AH/19.2AH(G2) replacement:  if your original battery is 52V19.2AH, we can build 52V21AH for the replacement, compatible battery case, same connector and charging port. Why the AH is different because Samsung has different cell models with different AH and we use different Samsung cells for the battery(we use Samsung INR18650 35E cells for the battery); the more AH the battery has, the more mileage you can get each charge. 

The length for the battery is 393mm; 

Differences between GBK Juiced G2 battery and original Juiced battery:

1. No power display panel(you can check your battery level on the control display if the battery has no battery display LED)
2. Non-detachable handle
3. Same appearance, different molds for alloy/plastic shell
4. No Apple positioning function
5. No sleep function
6. May be loose when installed, slovable by adding gaskets
7. Different fuses(original 2x 25A; new: 2x 30A fuse)
8. Need to unlock the battery to turn on the battery(the switch is hidded by the upper interface/key lock); if you want to remove the switch function, we can do it for you, just email us.

This G2 Juiced battery with a handle bar but  has no battery level LED fits the following Juiced eBike models:

CampScrambler,
CityScrambler,
Crosscurrent S2,
CrossCurrent X,
CrossCurrent X Step-Through,
HyperScrambler 2,
HyperScorpion,
HyperScorpion Express
RipCurrent,
RipCurrent S ,
RipCurrent S Step-Through,
RipRacer
Scorpion X,

Juiced Bike battery 52V19.2AH/13AH battery(G1) replacement:  if your original battery is 52V19.2AH or 52V13AH, we can build 52V21AH for the replacement, the same battery case, connector and charging port, you can just plug and play when you get the new battery. Why the AH is different because Samsung has different cell models with different AH and we use different Samsung cells for the battery(we use Samsung INR18650 35E cells for the battery); the more AH the battery has, the more mileage you can get each charge. 

The length for the battery is 393mm; for the width and height, you can measure the head cap and bottom base of the battery and refer to our pictures on the website.

If your battery mounting bases(upper and lower interface) are broken, you can order the Juiced key lock/upper interface together with the battery. The upper interface includes the key lock and connector with cable soldered. We will send you email for confirmation if you order the mounting bases before shipping.

This G1 battery(has no handle bar)fits the following Juiced eBike models:
CampScrambler
CityScrambler
CrossCurrent S2
CrossCurrent X
HyperFat 1100
HyperScrambler
HyperScrambler 2
HyperScorpion
RipCurrent

52V 20AH Battery for Dengfu E55 or E56 frame:

If you choose the smart BMS for the battery, you can view the battery parameter via mobile app.

30A BMS for 750W-1000W motor;

40A BMS for 1000W-1500W motor;

50A BMS for 1500W-1800W motor.

Ebike fuel tank battery which is designed to install in the motorcycle fuel tank position. It can also be install on the duwntue. 

There are basically two types of fuel tank cases, all is the same except different height.

The battery mounting foot is included.